The Trend Synthesis Thin Film Research as Electronic Device (A Review)

Authors

Aris Doyan , Susilawati , Agus Abi Purwoko , Ibrahim , Sukainil Ahzan , Sifaul Gummah , Bahtiar , Muhammad Ikhsan

DOI:

10.29303/jppipa.v9i11.5764

Published:

2023-11-25

Issue:

Vol. 9 No. 11 (2023): November

Keywords:

Electronic Device, Review, Synthesis, Thin Film

Review

Downloads

How to Cite

Doyan, A. ., Susilawati, Purwoko, A. A. ., Ibrahim, Ahzan, S. ., Gummah, S. ., … Ikhsan, M. . (2023). The Trend Synthesis Thin Film Research as Electronic Device (A Review). Jurnal Penelitian Pendidikan IPA, 9(11), 1155–1164. https://doi.org/10.29303/jppipa.v9i11.5764
Crossref
Scopus
Google Scholar
Europe PMC

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

A thin film is a material with optical properties highly dependent on the dielectric constant, refractive index, and gap energy. This research aims to identify and analyze research trends in thin-layer synthesis as electronic devices. This research is qualitative. The data used in this research was obtained from documents indexed by Google Scholar from 2014-2023 using Publish or Perish and Dimension.ai. Research procedures use PRISMA guidelines. The data identified and analyzed included the type of publication, author on thin layer synthesis, source of publication, and the title of research on thin layer synthesis that was widely cited. The data analysis method uses bibliometric analysis assisted by VOSviewer software. The results of the study show that the research trend in thin-layer synthesis has experienced a fluctuating increase from 2014 to 2020. The journal containing the most thin-layer synthesis articles is ECS Meeting Abstracts with 676. The results of the density mapping analysis show that the theme that is rarely researched is organic semiconductors, organic thin film transistors, and green synthesis.



References

Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019). 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting. Progress in Materials Science, 106, 100578. https://doi.org/10.1016/j.pmatsci.2019.100578

Bahtiar, B., Yusuf, Y., Doyan, A., & Ibrahim, I. (2023). The Trend of Technology Pedagogical Content Knowledge (TPACK) Research in 2012-2022: Contribution to Science Learning of 21st Century. Jurnal Penelitian Pendidikan IPA, 9(5), 39–47. https://doi.org/10.29303/jppipa.v9i5.3685

Beygisangchin, M., Abdul Rashid, S., Shafie, S., Sadrolhosseini, A. R., & Lim, H. N. (2021). Preparations, properties, and applications of polyaniline and polyaniline thin films—A review. Polymers, 13(12). https://doi.org/10.3390 13122003.

Bittau, F., Potamialis, C., Togay, M., Abbas, A., Isherwood, P. J., Bowers, J. W., & Walls, J. M. (2018). Analysis and optimisation of the glass/TCO/MZO stack for thin film CdTe solar cells. Solar Energy Materials and Solar Cells, 187, 15–22. https://doi.org/10.1016/j.solmat.2018.07.019

Bretos, I., Jiménez, R., Ricote, J., & Calzada, M. L. (2018). Low-temperature crystallization of solution-derived metal oxide thin films assisted by chemical processes. Chemical Society Reviews, 47(2), 291–308. https://doi.org/10.1039/C6CS00917D

Bush, K. A., Rolston, N., Gold-Parker, A., Manzoor, S., Hausele, J., Yu, Z. J., & McGehee, M. D. (2018). Controlling thin-film stress and wrinkling during perovskite film formation. ACS Energy Letters, 3(6), 1225–1232. https://doi.org/10.1021/acsenergylett.8b00544

Cao, D. H., Stoumpos, C. C., Yokoyama, T., Logsdon, J. L., Song, T. B., Farha, O. K., & Kanatzidis, M. G. (2017). Thin films and solar cells based on semiconducting two-dimensional ruddlesden–popper. ACS Energy Letters, 2(CH3NH3), 982–990. https://doi.org/10.1021/acsenergylett.7b00202

Chandra, Y. (2018). Mapping the evolution of entrepreneurship as a field of research (1990–2013): A scientometric analysis. PloS One, 13(1), 190228. https://doi.org/10.1371/journal.pone.0190228

Chaudhari, M. N., Ahirrao, R. B., & Sanabhau, D. B. (2021). Thin film Deposition Methods: A Critical Review. International Journal for Research in Applied Science & Engineering, 9, 5215–5232. https://doi.org/10.22214/ijraset.2021.36154

Chen, C., & Song, M. (2019). Visualizing a field of research: A methodology of systematic scientometric reviews. PloS One, 14(10), 223994. https://doi.org/10.1371/journal.pone.0223994

Deng, H., Yuan, S., Yang, X., Zhang, J., Khan, J., Zhao, Y., & Tang, J. (2018). Highâ€throughput method to deposit continuous composition spread Sb2 (SexS1− x) 3 thin film for photovoltaic application. Progress in Photovoltaics: Research and Applications, 26(4), 281–290. https://doi.org/10.1002/pip.2980

Dhavale, S. B., Patil, V. L., Beknalkar, S. A., Teli, A. M., Patil, A. H., Patil, A. P., & Patil, P. S. (2021). Study of solvent variation on controlled synthesis of different nanostructured NiCo2O4 thin films for supercapacitive application. Journal of Colloid and Interface Science, 588, 589–601. https://doi.org/10.1016/j.jcis.2020.12.057

Fu, Y. Q., Luo, J. K., Nguyen, N. T., Walton, A. J., Flewitt, A. J., Zu, X. T., & Milne, W. I. (2017). Advances in piezoelectric thin films for acoustic biosensors, acoustofluidics and lab-on-chip applications. Progress in Materials Science, 89, 31–91. https://doi.org/10.1016/j.pmatsci.2017.04.006

Giraldo, S., Jehl, Z., Placidi, M., Izquierdoâ€Roca, V., Pérezâ€Rodríguez, A., & Saucedo, E. (2019). Progress and perspectives of thin film kesterite photovoltaic technology: a critical review. Advanced Materials, 31(16), 1806692. https://doi.org/10.1002/adma.201806692

Güzelçimen, F., Tanören, B., Çetinkaya, Ç., Kaya, M. D., Efkere, H. İ., Özen, Y., & Özçelik, S. (2020). The effect of thickness on surface structure of rf sputtered TiO2 thin films by XPS, SEM/EDS. AFM and SAM. Vacuum, 182, 109766. https://doi.org/10.1016/j.vacuum.2020.109766

Hossain, M. K., Ahmed, M. H., Khan, M. I., Miah, M. S., & Hossain, S. (2021). Recent progress of rare earth oxides for sensor, detector, and electronic device applications: a review. ACS Applied Electronic Materials, 3(10), 4255–4283. https://doi.org/10.1021/acsaelm.1c00703

Huang, Y. C., Liu, Y., Ma, C., Cheng, H. C., He, Q., Wu, H., & Duan, X. (2020). Sensitive pressure sensors based on conductive microstructured air-gap gates and two-dimensional semiconductor transistors. Nature Electronics, 3(1), 59–69. Retrieved from https://www.nature.com/articles/s41928-019-0356-5

Jangid, N. K., Jadoun, S., & Kaur, N. (2020). A review on high-throughput synthesis, deposition of thin films and properties of polyaniline. European Polymer Journal, 125, 109485. https://doi.org/10.1016/j.eurpolymj.2020.109485

Jilani, A., Abdel-Wahab, M. S., & Hammad, A. H. (2017). Advance deposition techniques for thin film and coating. Modern Technologies for Creating the Thin-Film Systems and Coatings, 2(3), 137–149. https://doi.org/10.5772/65702

Kaur, S., Kumar, R., Kaur, R., Singh, S., Rani, S., & Kaur, A. (2022). Piezoelectric materials in sensors: Bibliometric and visualization analysis. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.484

Kim, M., & Roth, W.-M. (2018). Dialogical argumentation in elementary science classrooms. Cultural Studies of Science Education, 13(4). https://doi.org/10.1007/s11422-017-9846-9

Liao, Y. K., Liu, Y. T., Hsieh, D. H., Shen, T. L., Hsieh, M. Y., Tzou, A. J., & Kuo, H. C. (2017). Breakthrough to non-vacuum deposition of single-crystal, ultra-thin, homogeneous nanoparticle layers: A better alternative to chemical bath deposition and atomic layer deposition. Nanomaterials, 7(4), 78. https://doi.org/10.3390/nano7040078

Lin, D., Wu, Z., Li, S., Zhao, W., Ma, C., Wang, J., & Yang, X. (2017). Large-area Au-nanoparticle-functionalized Si nanorod arrays for spatially uniform surface-enhanced Raman spectroscopy. ACS Nano, 11(2), 1478–1487. https://doi.org/10.1021/acsnano.6b06778

Liu, J., Chen, Y., Feng, X., & Dong, R. (2022). Conductive 2D Conjugated Metal–Organic Framework Thin Films: Synthesis and Functions for (Optoâ€) electronics. Small Structures, 3(5), 2100210. https://doi.org/10.1002/sstr.202100210

Liu, J., & Wöll, C. (2017). Surface-supported metal–organic framework thin films: fabrication methods, applications, and challenges. Chemical Society Reviews, 46(19), 5730–5770. https://doi.org/10.1039/C7CS00315C

Lo Presti, F., Pellegrino, A. L., & Malandrino, G. (2022). Metalâ€organic chemical vapor deposition of oxide perovskite films: a facile route to complex functional systems. Advanced Materials Interfaces, 9(14), 2102501. https://doi.org/10.1002/admi.202102501

Lokhande, A. C., Shinde, N. M., Shelke, A., Babar, P. T., & Kim, J. H. (2017). Reliable and reproducible colorimetric detection of mercury ions (Hg 2+) using green synthesized optically active silver nanoparticles containing thin film on flexible plastic substrate. Journal of Solid State Electrochemistry, 21, 2747–2751. https://doi.org/10.1007/s10008-016-3481-3

Lokhande, V. C., Lokhande, A. C., & Lokhande, C. D. (2020). Nanostructured metal chalcogenide/oxide films based supercapacitors. In Progress and Prospects in Nanoscience Today (pp. 179–208). https://www.researchgate.net/profile/Pawandeep-Kaur-14/publication/340362654

Ludwig, A. (2019). Discovery of new materials using combinatorial synthesis and high-throughput characterization of thin-film materials libraries combined with computational methods. Npj Computational Materials, 5(1), 70. https://doi.org/10.1038/s41524-019-0205-0

Na, J. C., & Ye, Y. E. (2017). Content analysis of scholarly discussions of psychological academic articles on Facebook. Online Information Review, 41(3), 337–353. https://doi.org/10.1108/OIR-02-2016-0058

Obodo, R. M., Whyte, G. M., Onah, E. U., Ezike, S. C., Ugwuoke, P. E., Ahmad, I., & Ezema, F. (2023). Enhancement of ceramics applications using a surface modification of coated various deposition techniques in ceramics composites. In Surface Modification and Functionalization of Ceramic Composites (pp. 81–89). Elsevier. https://doi.org/10.1016/B978-0-323-85883-0.00018-1

Ramanujam, J., Bishop, D. M., Todorov, T. K., Gunawan, O., Rath, J., Nekovei, R., & Romeo, A. (2020). Flexible CIGS, CdTe and a-Si: H based thin film solar cells: A review. Progress in Materials Science, 110(06), 619. https://doi.org/10.1016/j.pmatsci.2019.100619

Ramos, R. F., Rita, P., & Moro, S. (2019). From institutional websites to social media and mobile applications: A usability perspective. European Research on Management and Business Economics, 25(3), 138–143. https://doi.org/10.1016/j.iedeen.2019.07.001

Santinacci, L. (2022). Atomic layer deposition: an efficient tool for corrosion protection. Current Opinion in Colloid & Interface Science, 10(16), 74. https://doi.org/10.1016/j.cocis.2022.101674

Scopigno, R., Cignoni, P., Pietroni, N., Callieri, M., & Dellepiane, M. (2017). Digital fabrication techniques for cultural heritage: a survey. Computer Graphics Forum, 36(1), 6–21. https://doi.org/10.1111/cgf.12781

Shinde, P. A., Lokhande, V. C., Ji, T., & Lokhande, C. D. (2017). Facile synthesis of hierarchical mesoporous weirds-like morphological MnO2 thin films on carbon cloth for high performance supercapacitor application. Journal of Colloid and Interface Science, 498, 202–209. https://doi.org/10.1016/j.jcis.2017.03.013

Son, D. H., Kim, S. H., Kim, S. Y., Kim, Y. I., Sim, J. H., Park, S. N., & Kim, D. H. (2019). Effect of solid-H 2 S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device. Journal of Materials Chemistry A, 7(44), 25279–25289. https://doi.org/10.1039/C9TA08310C

Tajik, S., Beitollahi, H., Nejad, F. G., Shoaie, I. S., Khalilzadeh, M. A., Asl, M. S., & Shokouhimehr, M. (2020). Recent developments in conducting polymers: Applications for electrochemistry. RSC Advances, 10(62), 37834–37856. https://doi.org/10.1039/D0RA06160C

Vanalakar, S. A., Patil, P. S., & Kim, J. H. (2018). Recent advances in synthesis of Cu2FeSnS4 materials for solar cell applications: a review. Solar Energy Materials and Solar Cells, 182, 204–219. https://doi.org/10.1016/j.solmat.2018.03.021

Xue, D. J., Liu, S. C., Dai, C. M., Chen, S., He, C., Zhao, L., & Wan, L. J. (2017). GeSe thin-film solar cells fabricated by self-regulated rapid thermal sublimation. Journal of the American Chemical Society, 139(2), 958–965. https://doi.org/10.1021/jacs.6b11705

Yoon, S. M., Min, H., Kim, J. B., Kim, G., Lee, K. S., & Seok, S. I. (2021). Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule, 5(1), 183–196. https://doi.org/10.1016/j.joule.2020.11.020

Author Biographies

Aris Doyan, Pascasarjana Universitas Mataram, Program Studi Magister Pendidikan IPA.

 

 

 

Susilawati, University of Mataram

Agus Abi Purwoko, University of Mataram

Ibrahim, University of Mataram

Sukainil Ahzan, Universitas Pendidikan Mataram

Sifaul Gummah, Universitas Pendidikan Mataram

Bahtiar, Universitas Islam Negeri Mataram

Muhammad Ikhsan, Diponegoro University

License

Copyright (c) 2023 Aris Doyan, Susilawati, Agus Abi Purwoko, Ibrahim, Sukainil Ahzan, Sifaul Gummah, Bahtiar, Muhammad Ikhsan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).