Asphalt Modification with LDPE Plastic Waste Treated with Glacidyl Methacrylate and Benzoyl Peroxide Initiator

Authors

Yolandha Putri , Tamrin , Darwin Yunus Nasution

DOI:

10.29303/jppipa.v9i11.6045

Published:

2023-11-25

Issue:

Vol. 9 No. 11 (2023): November

Keywords:

Aspalt, GMA, Grafting plastic waste, LDPE

Research Articles

Downloads

How to Cite

Putri, Y., Tamrin, T., & Nasution, D. Y. . (2023). Asphalt Modification with LDPE Plastic Waste Treated with Glacidyl Methacrylate and Benzoyl Peroxide Initiator. Jurnal Penelitian Pendidikan IPA, 9(11), 10338–10342. https://doi.org/10.29303/jppipa.v9i11.6045

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

The aim of this research is to determine the quality of the softening point test, penetration test and deactivation of modified asphalt from garfted LDPE plasticization waste. And for grafting treatment, use the internal mixer method where GMA and BPO are added to the grafting mixture. From the grafting results obtained, we carried out an FTIR test and identified a wave number of 1728/cm indicating the presence of the C-H or benzene functional group. This can be interpreted as a grafting process which can also be seen at the wave number 1730/cm. This can be interpreted as a grafting process from GMA to LDPE. And for the wave number at 2723/cm, there is a CH3 stetching from the LDPE chain backbone so that what is obtained is the LDPE-g-GMA spectrum. As for the TGA and DSC test results obtained, namely that in DSC the peak value of the number is at a temperature of 160.60 C and the value obtained from TGA is 373.13 C. And to find out the standard of modified asphalt from mixing asphalt with waste The value of the grafted plastic that we carried out was 65.23, for the penetration test it was 53.7 and for the deactivation test it was 55.46. This can be interpreted that all three are in accordance with the 2018 Bina Marga asphalt standards

References

Aumnate, C., Rudolph, N., & Sarmadi, M. (2019). Recycling of polypropylene/polyethylene blends: Effect of chain structure on the crystallization behaviors. Polymers, 11(9), 1456.

Bodirlau, R., & Teaca, C. A. (2009). Fourier transform infrared spectroscopy and thermal analysis of lignocellulose fillers treated with organic anhydrides. Rom. J. Phys, 54(1–2), 93–104.

Fink, J. K. (2017). Reactive polymers: fundamentals and applications: a concise guide to industrial polymers. William Andrew.

Hadid, M., Ubudiyah, A., & Apriyani, D. W. (2020). Alternatif Aspal Modifikasi Polimer dengan Menggunakan Sampah Plastik Kemasan Makanan. Jurnal Manajemen Aset Infrastruktur & Fasilitas, 4(1). https://doi.org/http://dx.doi.org/10.12962/j26151847.v4i1.6832

Hesler, M., Aengenheister, L., Ellinger, B., Drexel, R., Straskraba, S., Jost, C., Wagner, S., Meier, F., von Briesen, H., & Büchel, C. (2019). Multi-endpoint toxicological assessment of polystyrene nano-and microparticles in different biological models in vitro. Toxicology in Vitro, 61, 104610. https://doi.org/https://doi.org/10.1016/j.tiv.2019.104610

Kik, K., Bukowska, B., & Sicińska, P. (2020). Polystyrene nanoparticles: Sources, occurrence in the environment, distribution in tissues, accumulation and toxicity to various organisms. Environmental Pollution, 262, 114297. https://doi.org/https://doi.org/10.1016/j.envpol.2020.114297

Kurniawan, A., Wirjosentono, B., Tamrin, T., Siregar, A. H., & Nasution, D. A. (2020). Preparation and characterisations of maleic anhydride-modified-(asphalt, natural rubber, and polystyrene) blends containing sand aggregate. AIP Conference Proceedings, 2267(1). https://doi.org/https://doi.org/10.1063/5.0015735

Kurniawan, B., Huamaira, T., Hasanah, S., Christina, E., & At-Tsaqib, J. H. (2022). Modifikasi Struktur Polistirena Menggunakan Maleat Anhidrida sebagai Pengikat Silang dan Benzoil Peroksida sebagai Inisiator. Asian Journal of Mechatronics and Electrical Engineering, 1(1), 25–34. https://doi.org/https://doi.org/10.55927/ajmee.v1i1.1310

Rahayu, I., Zainuddin, A., Malik, Y. T., & Hendrana, S. (2020). Maleic anhydride grafted onto high density polyethylene with an enhanced grafting degree via monomer microencapsulation. Heliyon, 6(4). https://doi.org/https://doi.org/10.1016/j.heliyon.2020.e03742

Ritonga, A. H. (2017). Pembuatan Aspal Polimer Menggunakan Karet SIR-20 Yang Diinisiasi Oleh Adanya Dikumil Peroksida Melalui Proses Ekstrusi. Jurnal Stikna, 1(2).

Sclavons, M., Franquinet, P., Carlier, V., Verfaillie, G., Fallais, I., Legras, R., Laurent, M., & Thyrion, F. C. (2000). Quantification of the maleic anhydride grafted onto polypropylene by chemical and viscosimetric titrations, and FTIR spectroscopy. Polymer, 41(6), 1989–1999. https://doi.org/https://doi.org/10.1016/S0032-3861(99)00377-8

Shokri, E., Yegani, R., Heidari, S., & Shoeyb, Z. (2015). Effect of PE-g-MA compatibilizer on the structure and performance of HDPE/EVA blend membranes fabricated via TIPS method. Chemical Engineering Research and Design, 100, 237–247. https://doi.org/https://doi.org/10.1016/j.cherd.2015.05.025

Stevens, M. P. (2001). Kimia Polimer (Cetakan pe). Oxford University Press, Inc.

Suprayitno, S., & Mudjanarko, S. W. (2019). Studi Analisis Uji Marshall Pada Pembuatan Campuran Aspal Plastik Jenis Hdpe. E-Jurnal SPIRIT PRO PATRIA, 5(2), 142–151. https://doi.org/https://doi.org/10.29138/spirit.v5i2.1004

Thomas, L. C. (2005). An introduction to the techniques of differential scanning calorimetry (DSC) and modulated DSC.

Utracki, L. A. (2002). Compatibilization of polymer blends. Canadian Journal of Chemical Engineering, 80(6), 1008–1016.

Wang, Y., Shi, Y., Shao, W., Ren, Y., Dong, W., And, F. Z. 2, & Liu, L.-Z. (2020). Crystallization, Structures, and Properties of Di ff erent Polyolefins with Similar Grafting Degree of Maleic Anhydride.

Yao, Y., Chau, E., & Azimi, G. (2019). Supercritical fluid extraction for purification of waxes derived from polyethylene and polypropylene plastics. Waste Management, 97, 131–139. https://doi.org/https://doi.org/10.1016/j.wasman.2019.08.003

Author Biographies

Yolandha Putri, Universitas Sumatera Utara

Tamrin, Universitas Sumatera Utara

Darwin Yunus Nasution, Universitas Sumatera Utara

License

Copyright (c) 2023 Yolandha Putri, Tamrin, Darwin Yunus Nasution

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).