Design and Implementation of Real-Time Diesel Engine Operational Monitoring Devices Based on Microcontrollers
DOI:
10.29303/jppipa.v11i9.9739Published:
2025-09-30Downloads
Abstract
Monitoring of diesel engine operational performance on fishing vessels recorded in real time based on microcontrollers is still rarely used. Monitoring of diesel engine operations is important to ensure the engine is in optimal performance as well as a consideration for predictive maintenance actions. This study aims to design and implement a real-time monitoring device based on microcontrollers. This device can measure and record RPM, temperature, and pressure data on diesel engines with good accuracy. Hall effect sensors for RPM, DS18B20 for temperature, and piezoresistive sensors for pressure are used, to maintain the right time it is equipped with RTC, SD card module for data storage, and Wi-Fi module for data access via the web. The test results show that this device is able to measure with good accuracy on each parameter with an average error of below 2%. When the operational parameters exceed the predetermined threshold, the device successfully gives an alarm as a critical sign. This study makes a significant contribution to the management and maintenance of diesel engines with real-time data and wireless access that increases efficiency and minimizes downtime due to operational failures
Keywords:
Diesel engine Monitoring real time Hall effect DS18B20 PiezoresistiveReferences
Abrori, M. Z. L., Sidhi, S. D. P., & Prasetyo, D. (2021). Modern Monitoring Instrument to Support Fishing Vessel Operation and Maintenance: A Review. International Journal on Advanced Science, Engineering and Information Technology, 11(6), 2305. https://doi.org/10.18517/ijaseit.11.6.15066
Agustini, S. A., Mulyatno, I. P., & Amiruddin, W. (2023). Perancangan Sistem Digitalisasi Monitoring Data RPM Engine dan Temperatur Minyak Lubrikan Kapal Berbasis Internet of Things (IoT) dengan Metode Simulasi Prototype ESP32. Jurnal Teknik Perkapalan, 11(4).
Akbar, R., & Chusyairi, A. (2021). Rancang Bangun Dispenser Penuangan Air Minum Otomatis Berbasis Arduino Menggunakan Metode Prototype. Aisyah Journal Of Informatics and Electrical Engineering (AJIEE), 3(2), 153–162.
Alfitroh, M. I., & Wardana, H. K. (2023). Rancang Bangun Sistem Monitoring Arus, Tegangan, Kecepatan Putar Turbin dan Suhu Berbasis IoT Pada Pembangkit Listrik Tenaga Uap Mini Skala Laboratorium. Rekayasa, 16(1), 9–16.
Ardhi, S., Gunawan, T. P., Sugiono, J. P., Harianto, R. A., & Muhammad, F. A. (2024). Pembuatan Prototipe Sistem Berbasis IoT untuk Monitoring dan Estimasi Biaya Konsumsi Air di Kos-kosan. Prosiding Seminar Nasional Sains Dan Teknologi Terapan, 1.
Arnisti, K., Evita, M., & Djamal, M. (n.d.). Pendeteksi UV di Pantai Menggunakan UVM 30A Berbasis IoT.
Aziz, I., Sumarahinsih, A., & Permatasari, D. C. (2024). Perancangan Automatic Tail Dock Berbasis Arduino Nano Pada Pesawat Menggunakan Metode PID. Uranus: Jurnal Ilmiah Teknik Elektro, Sains Dan Informatika, 2(3), 221–238.
Bhakti, H., & Bachri, O. S. (2024). Implementasi Sistem Monitoring Suhu Dan Ph Air Kolam Budidaya Ikan Lele Menggunakan Arduino Esp8266 Dan Arduino Ide. Jurnal Informatika Dan Teknik Elektro Terapan, 12(3S1).
Davari, N., Veloso, B., Costa, G. de A., Pereira, P. M., Ribeiro, R. P., & Gama, J. (2021). A Survey on Data-Driven Predictive Maintenance for the Railway Industry. Sensors, 21(17), 5739. https://doi.org/10.3390/s21175739
Fikroh, U., & Syahrorini, S. (2024). Arduino Sensors Reveal Temperature-Driven Compression Fluctuations in Vehicle Engines. Indonesian Journal of Innovation Studies, 25(4), 10–21070.
Fuadi, M. H. (2020). Rancang Bangun Kontrol dan Monitoring Suhu Pada Mesin Diesel Menggunakan Mobile. Journal of Telecommunication Network (Jurnal Jaringan Telekomunikasi), 10(1), 31–37.
Girawan, B. A., Laksana, N. A. S., & Prabowo, D. (2022). Perancangan Sepeda Listrik Semoli Untuk Beban 80 Kg. Accurate: Journal of Mechanical Engineering and Science, 3(2), 1–7.
Gragasin, M. N. G., Cusi, K. G. D., Calle, A. M. J. M., Calabio, E. B., Enriquez, C. L. P., Dablo, I. O., & Limos-Galay, J. A. (2024). Arduino Uno fire alarm system with Android connectivity using GSM Module, Temperature, and Smoke Sensor. International Journal of Research, 8(4), 9–17.
Harsoyo, I. T., Nugroho, A. K., & Nuriman, N. (2019). Rancang bangun tachometer digital berbasis arduino dilengkapi charging dan mode penyimpan data. Elektrika, 11(2), 6–11.
Hu, J., & Chen, P. (2020). Predictive maintenance of systems subject to hard failure based on proportional hazards model. Reliability Engineering & System Safety, 196, 106707. https://doi.org/10.1016/j.ress.2019.106707
Kristianto, L., Wibowo, W., Astriawati, N., & Kristiawan, N. (2023). Perawatan Mesin Diesel Generator Pada Kapal KN.SAR SADEWA 231. Journal of Applied Mechanical Engineering and Renewable Energy, 3(2), 45–50. https://doi.org/10.52158/jamere.v3i2.543
Kuncoro, S. D., Androva, A., & Mukhtar, A. (2023). Rancang bangun instrumentasi hall effect sensor magnetic pada dynamometer prony breake dengan sistem monitoring lcd 16x4 displayberbasis mikrokontroler arduino. Cross-Border, 6(2), 843–851.
Putra, W. A. H. S., Jamaaluddin, J., Anshory, I., & Ahfas, A. (2024). Spreadsheet-Based Car Engine Temperature And Compression Pressure Gauge. Journal of Computer Networks, Architecture and High Performance Computing, 6(1). https://doi.org/10.47709/cnahpc.v6i1.3472
Reinanda, M. A., Sulu, V. N., Alfredo, R. B., & Rochadiani, T. H. (2024). Implementasi Internet Of Things (Iot) Dengan Sensor Ds18b20 Dan Float Sensor Untuk Monitoring Suhu Dan Ketinggian Air Pada Proses Memandikan BayI. JATI (Jurnal Mahasiswa Teknik Informatika), 8(3), 3824–3829.
Repdhi Febriyan, & Bagus Dwi Cahyono. (2023). Pemeliharaan Pada Mesin Moulding Unimat 22 A Di PT. Sejin Lestari Furniture. Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 2(1 SE-Articles), 262–274. https://doi.org/10.55606/jtmei.v2i1.1521
Surapati, A., Kurnia, A., & Agustian, I. (2023). Rancang Bangun Alat Pendeteksi Dini Over Heat Mesin Kendaraan Melalui Suhu Air Pendingin. Jurnal Teknologi, 15(1), 33–42.
Suryowinoto, A., Pramono, I. A., Widyanto, C., & Irawan, H. (2022). Sistem Kendali Dan Monitoring Air Conditioner Pada Elektrik Room Container Crane Berbasis Android Dengan Sistem Internet of Things. Prosiding Seminar Nasional Sains Dan Teknologi Terapan.
Ulfa, M. A., Dewi, I. A. S. K., & Darmawan, Y. (2023). Peramalan Produksi Pulp Menggunakan ARIMA dan Analisis Daya Saingnya di Pasar Internasional. Jurnal Ekonomi Dan Bisnis Digital (Ekobil), 2(2).
Yusup, M. B., Widiantoro, A., & Mahardika, E. (2020). Rancang Bangun Diagnosa Trouble Engine Gasoline Dengan Sistem Fuel Injeksi Menggunakan Arduino Dan Visual Basic. SinarFe7, 3(1).
License
Copyright (c) 2025 M. Zaki Latif Abrori, J. Preston Siahaan, Rizqi Ilmal yaqin, Bobby Demeianto, Mula Tumpu, Darmawan Darmawan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
