Development of Interactive Electronic Module for Charged Reaction Rate Science Technology Engineering and Mathematics (STEM)

Authors

DOI:

10.29303/jppipa.v9i3.1788

Published:

2023-03-31

Issue:

Vol. 9 No. 3 (2023): March

Keywords:

Interactive Module, STEM, Reaction Rate

Research Articles

Downloads

How to Cite

Indriana, R. A. ., & Kamaludin, A. (2023). Development of Interactive Electronic Module for Charged Reaction Rate Science Technology Engineering and Mathematics (STEM). Jurnal Penelitian Pendidikan IPA, 9(3), 977–986. https://doi.org/10.29303/jppipa.v9i3.1788

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

Students' low critical thinking ability requires teachers to design the learning process creatively. One of the efforts teachers can make is integrating teaching materials with technology and learning models of Science, Technology, Engineering, and Mathematics (STEM). This study aims to develop an interactive electronic module containing STEM on the reaction rate material and determine the resulting module's quality. This research is development research (R&D) with a 4D development model (Define, Design, Develop, and Disseminate). The product is an interactive electronic module containing STEM in the form of HTML containing material, interactive quizzes, and STEM projects. The research instrument used was a quality assessment sheet for media experts, material experts, reviewers (high school chemistry teachers), and response sheets for class XI high school students. The results of the product quality assessment by media experts get a percentage of 96.7% in the very good category, material experts get 82.2% in the good category, and reviewers get 95.0% in the very good category. The students responded positively to the module with a percentage of 96.0%. Based on the assessment results and student responses, it can be concluded that the product developed is feasible to be used as an alternative media in the learning process on the reaction rate material to improve students' critical thinking skills

References

Adawiyah, R., Sukaryawan, M., & Mujamil, J. (2019). Pengembangan modul laju reaksi berbasis konstruktivisme lima fase needham. Jurnal Penelitian Pendidikan Kimia, 6(1), 18–24. Retrieved from https://ejournal.unsri.ac.id/index.php/jurpenkim/article/view/8484.

Ananda, Y. Y. T., & Dasna, I. W. (2019). Pembelajaran learning cycle 5E dengan pendekatan STEM terhadap kemampuan berpikir kritis siswa pada materi laju reaksi. Seminar Nasional Kimia dan Pembelajarannya, 418–425.

Astuti, S., Danial, M., & Anwar, M. (2018). Pengembangan LKPD berbasis PBL (Problem based learning) untuk meningkatkan keterampilan berpikir kritis peserta didik pada materi kesetimbangan kimia. Chemistry Education Review, 1(2), 90–114. https://doi.org/10.26858/cer.v0i1.5614

Hastari, G. A. W., Agung, A. A. G., & Sudarma, I. K. (2019). Pengembangan modul elektronik berpendekatan kontekstual pada mata pelajaran ilmu pengetahuan sosial kelas VIII sekolah menengah pertama. Jurnal Edutech Undiksha, 7(1), 33–43. Retrieved from https://ejournal.undiksha.ac.id/index.php/JEU/article/view/20006.

Bire, A. L., Geradus, U., & Bire, J. (2014). Pengaruh gaya belajar visual, auditorial, dan kinestetik terhadap prestasi belajar siswa. Jurnal Kependidikan, 44(2), 168–174. Retrieved from https://journal.uny.ac.id/index.php/jk/article/view/5307.

Cholik, C. A. (2017). Pemanfaatan teknologi informasi dan komunikasi untuk meningkatkan pendidikan di Indonesia. Jurnal Ilmiah Indonesia, 2(6), 21–30. Retrieved from https://jurnal.syntaxliterate.co.id/index.php/syntax-literate/article/view/130

Davidi, E. I. N., Sennen, E., & Supardi, K. (2021). Integrasi pendekatan STEM (Science, Technology, Enggeenering and Mathematic) untuk peningkatan keterampilan berpikir kritis siswa sekolah dasar. Jurnal Pendidikan dan Kebudayaan, 11(1), 11–22. https://doi.org/10.24246/j.js.2021.v11.i1.p11-22

Dayanti, Z. R., Respati, R., & Gyartini, R. (2021). Pengembangan bahan ajar elektronik flipbook dalam pembelajaran seni rupa daerah siswa kelas V di sekolah dasar. Journal of Elementary Education, 4(5), 704–711. Retrieved from https://journal.ikipsiliwangi.ac.id/index.php/collase/article/view/8187.

Dywan, A. A., & Airlanda, G. S. (2020). Efektivitas model pembelajaran project based learning berbasis STEM dan tidak berbasis STEM terhadap keterampilan berpikir kritis siswa. Jurnal Basicedu, 4(2), 344–354. https://doi.org/10.31004/basicedu.v4i2.353

Saputri, M. E. E., & Oktarin, I. B. (2019). Pengembangan modul pembelajaran berbasis penemuan terbimbing pada mata kuliah matematika ekonomi. Jurnal Teknologi Pendidikan, 12(2), 146-154. https://doi.org/10.24114/jtp.v12i2.15230

Fitriyah, R. N. (2019). Pengembangan kompetensi guru di era revolusi industri 4.0 melalui pendidikan dan pelatihan. Prosiding Sendi_U, 1, 359–364. Retrieved from https://www.unisbank.ac.id/ojs/index.php/sendi_u/article/view/7302

Gevi, G. R., & Andromeda. (2019). Pengembangan e-modul laju reaksi berbasis inkuiri terbimbing terintegrasi virtual laboratory untuk SMA/ MA. Edukimia, 1(1), 53–61. https://doi.org/10.24036/ekj.v1.i1.a8

Hasanah, I., Melati, H. A., & Rasmawan, R. (2021). Pengembangan modul kimia pendekatan saintifik pada materi laju reaksi di madrasah aliyah (MA). Edukatif : Jurnal Ilmu Pendidikan, 3(6), 4160–4171. https://doi.org/10.31004/edukatif.v3i6.746

Herawati, N. S., & Muhtadi, A. (2018). Pengembangan modul elektronik (e-modul) interaktif pada mata pelajaran Kimia kelas XI SMA. Jurnal Inovasi Teknologi Pendidikan, 5(2), 180–191. https://doi.org/10.21831/jitp.v5i2.15424

Ibda, H. (2018). Penguatan literasi baru pada guru Madrasah Ibtidaiyah dalam menjawab tantangan era revolusi industri 4.0. Journal of Research and Thought on Islamic Education, 1(1), 1–19. https://doi.org/10.24260/jrtie.v1i1.1064.

Irmita, L. U. (2018). Pengembangan modul pembelajaran kimia menggunakan pendekatan science, technology, engineering and mathematic (STEM) pada materi kesetimbangan kimia. Orbital: Jurnal Pendidikan Kimia, 2(2), 26–36. https://doi.org/10.19109/ojpk.v2i2.2665

Karnegi, D. & Iswahyudi. (2019). Tantangan pembelajaran berbasis teknologi informasi era revolusi industri 4.0 di SMA Negeri 5 Prabumulih. Prosiding Seminar Nasional Pendidikan Program Pascasarjana Universitas PGRI Palembang, 138–147. Retrieved from https://jurnal.univpgri-palembang.ac.id/index.php/Prosidingpps/index

Kuswanto, J. (2019). Pengembangan modul tnteraktif pada mata pelajaran IPA terpadu kelas VIII. Jurnal Media Infotama, 15(2), 51–56. https://doi.org/10.37676/jmi.v15i2.866

Munawaroh, S., Seruni, R., Nurjayadi, M., & Kurniadewi, F. (2019). Pengembangan e-module biokimia pada materi metabolisme karbohidrat untuk mahasiswa program studi kimia. Jurnal Tadris Kimiya, 4(1), 69–77. Retrieved from https://journal.uinsgd.ac.id/index.php/tadris-kimiya/article/view/4679.

Nafidah, R., & Suratman, B. (2021). Pengembangan bahan ajar digital interaktif berbantuan adobe flash pada mata pelajaran korespondensi kelas X OTKP di SMK YPM 3 Taman. Jurnal Pendidikan Administrasi Perkantoran, 9(1), 39–50. Retrieved from https://journal.unesa.ac.id/index.php/jpap/article/view/8764

Oktaviani, A., Anom, K., & Lesmini, B. (2020). Pengembangan modul kimia terintegrasi STEM (Science, Technology, Engineering and Mathematics) dan PBL (Problem-Based Learning). Journal of Educational Chemistry, 2(2), 64-72. https://doi.org/10.21580/jec.2020.2.2.6279

Pahriah & Hendrawani. (2018). Efektifitas penggunaan modul multipel representasi berbasis inkuiri pada materi laju reaksi terhadap pemahaman konsep calon guru kimia. Prosiding Seminar Nasional Lembaga Penelitian dan Pendidikan Mandala, 6(1), 68–72. Retrieved from http://ejournal.mandalanursa.org/index.php/Prosiding/article/view/435.

Permanasari, A. (2016). STEM education: Inovasi dalam pembelajaran sains. Prosiding Seminar Nasional Pendidikan Sains, 23–34. Retrieved from https://jurnal.fkip.uns.ac.id/index.php/snps/article/view/9810

Pratama, R., & Alamsyah, M. (2020). Analisis kebutuhan guru terhadap pengembangan modul virtual kimia berbasis inkuiri terbimbing. Prosiding Seminar Nasional Sains, 1(1), 254–257. Retrieved from http://proceeding.unindra.ac.id/index.php/sinasis/article/view/4102

Puspita, K., Nazar, M., Hanum, L., & Reza, M. (2021). Pengembangan e-modul praktikum kimia dasar menggunakan aplikasi canva design. Jurnal IPA Dan Pembelajaran IPA, 5(2), 151–161. https://doi.org/10.24815/jipi.v5i2.20334

Putri, D., & Mitarlis. (2015). Pengembangan lembar kerja siswa berbasis mind mapping pada materi laju reaksi untuk melatihkan keterampilan berfikir kreatif siswa kelas XI SMA. UNESA Journal of Chemical Education, 4(2), 340–348. Retrieved from https://jurnalmahasiswa.unesa.ac.id/index.php journal-of-chemical-education/article/view/11964.

Putri, D. P. E., & Muhtadi, A. (2018). Pengembangan multimedia pembelajaran interaktif kimia berbasis android menggunakan prinsip mayer pada materi laju reaksi. Jurnal Inovasi Teknologi Pendidikan, 5(1), 38–47. https://doi.org/http://dx.doi.org/10.21831/jitp.v5i1.13752

Rachmawati, D., Suhery, T., & Anom, K. (2017). Pengembangan modul kimia dasar berbasis STEM problem based learning pada materi laju reaksi untuk mahasiswa program studi pendidikan kimia. Prosiding Seminar Nasional Pendidikan IPA, 239–248. Retrieved from http://conference.unsri.ac.id/index.php/semnasipa/article/view/692

Raharjo, M. W. C., Suryati, & Khery, Y. (2017). Pengembangan e-modul interaktif menggunakan adobe flash pada materi ikatan kimia untuk mendorong literasi sains siswa. Hydrogen: Jurnal Kependidikan Kimia, 5(1), 8-13. Retrieved from https://e-journal.undikma.ac.id/index.php/hydrogen/article/view/102.

Restiyowati, I., & Sanjaya, I. G. M. (2012). Pengembangan e-book interaktif pada materi kimia semester genap kelas XI SMA. UNESA Journal of Chemical Education, 1(1), 130–135. Retrieved from https://jurnalmahasiswa.unesa.ac.id/index.php/journal-of-chemical-education/article/view/167.

Seruni, R., Munawaroh, S., Kurniadewi, F., & Nurjayadi, M. (2019). Pengembangan modul elektronik (e-modul) biokimia pada materi metabolisme lipid menggunakan flip pdf professional. Jurnal Tadris Kimiya, 4(1), 48–56. Retrieved from https://journal.uinsgd.ac.id/index.php/tadris-kimiya/article/view/4672.

Setiawan, N. C. E., Sutrisno, Arief, M., & Danar. (2020). Pengenalan STEM (Science, Technology, Engineering, and Mathematics) dan pengembangan rancangan pembelajarannya untuk merintis pembelajaran kimia dengan sistem SKS di kota madiun. Lumbung Inovasi: Jurnal Pengabdian Kepada Masyarakat, 5(2), 56-64. https://doi.org/10.36312/linov.v5i2.465

Situmorang, M., Sitorus, M., & Situmorang, Z. (2015). Pengembangan bahan ajar kimia SMA/MA inovatif dan interaktif berbasis multimedia. Prosiding SEMIRATA 2015 Bidang MIPA BKS-PTN Barat, 533–542. Retrieved from https://jurnal.untan.ac.id/index.php/semirata2015/article/view/14267

Sukardjo, & Sari, L. P. (2008). Penilaian hasil belajar kimia. Yogyakarta: UNY Press.

Sulastri, Nurdiyana, Setiawati, Suanto, & Rustandi, R. (2021). Pelatihan pembuatan bahan ajar dan media pembelajaran. Jurnal Pengabdian Kepada Masyarakat, 1(2), 97–103. Retrieved from http://openjournal.unpam.ac.id/index.php/jpb/article/view/12410.

Suryani, K., Utami, I. S., Khairudin, Ariska, & Rahmadani, A. F. (2020). Pengembangan modul digital berbasis STEM menggunakan aplikasi 3D flipbook pada mata kuliah sistem operasi. Jurnal Mimbar Ilmu, 25(3), 358–367. Retrieved from https://ejournal.undiksha.ac.id/index.php/MI/article/view/28702.

Susanti, E. D., & Sholihah, U. (2021). Pengembangan e-modul berbasis flip pdf corporate pada materi luas dan volume bola. Jurnal Pendidikan Matematika, 3(1), 37–46. https://doi.org/10.32938/jpm.v3i1.1275

Syahirah, M., Anwar, L., & Holiwarni, B. (2020). Pengembangan modul berbasis STEM (Science, Technology, Engineering and Mathematics) pada pokok bahasan elektrokimia. Jurnal Pijar Mipa, 15(4), 317–324. https://doi.org/10.29303/jpm.v15i4.1602

Syifaunnida, S., & Kamaludin, A. (2022). Development of 5-E learning cycle-based simple chemistry practicum guideline module for eleventh grade. Jurnal Penelitian Pendiidkan IPA, 8(1), 156–162. https://doi.org/10.29303/jppipa.v8i1.988

Tipani, A., Toto, & Yulisma, L. (2019). Implementasi model PjBL berbasis STEM untuk meningkatkan penguasaan konsep dan kemampuan berpikir analitis siswa. Bio Educatio : The Journal of Science and Biology Education, 4(2), 70–76. Retrieved from http://jurnal.unma.ac.id/index.php/BE/article/view/1700.

Ulya, H., Rudibyani, R. B., & Efkar, T. (2018). Pengembangan modul kimia berbasis problem solving pada materi asam basa arrhenius. Jurnal Pendidikan dan Pembelajaran Kimia, 7(1), 129–141. Retrieved from https://jurnal.fkip.unila.ac.id/index.php/JPK/article/view/13979

Winatha, K. R. (2018). Pengembangan e-modul interaktif berbasis proyek mata pelajaran simulasi digital. Jurnal Pendidikan Teknologi dan Kejuruan, 15(2), 188–199. https://doi.org/10.23887/jptk-undiksha.v15i2.14021

Zulaiha, F., & Kusuma, D. (2020). Pengembangan modul berbasis STEM untuk siswa SMP. Jurnal Pendidikan Fisika dan Teknologi, 6(2), 246–255. https://doi.org/10.29303/jpft.v6i2.2182

Author Biography

Risma Alfina Indriana, aguskamaludin@gmail.com

License

Copyright (c) 2023 Risma Alfina Indriana, Agus Kamaludin

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).