The Effect of Carboxymethyl Cellulose (CMC) Addition on the Quality of Biodegradable Plastic from Corn Cob

Authors

M. Bayu Ihsan , Ratnawulan

DOI:

10.29303/jppipa.v9i7.4010

Published:

2023-07-25

Issue:

Vol. 9 No. 7 (2023): July

Keywords:

Biodegradable plastic, Carboxymethyl Cellulose (CMC), Corn Cob

Research Articles

Downloads

How to Cite

Ihsan, M. B. ., & Ratnawulan. (2023). The Effect of Carboxymethyl Cellulose (CMC) Addition on the Quality of Biodegradable Plastic from Corn Cob. Jurnal Penelitian Pendidikan IPA, 9(7), 5117–5125. https://doi.org/10.29303/jppipa.v9i7.4010
Crossref
Scopus
Google Scholar
Europe PMC

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

This study aims to determine the effect of CMC addition on thickness, tensile strength, elongation and biodegradation of biodegradable plastic from corn cob starch. In this study, the addition of Carboxymethyl Cellulose which plays a role in increasing the tensile strength of biodegradable plastics. This research was conducted in 2 stages. The first stage is varying CMC as much as 20%, 30%, 40%, 50% and 60% (w/b starch) and the second stage is mixing corn cob starch as much as 2 grams with CMC 20% - 60% w/b starch. The test results showed that the addition of CMC concentration of 20% w/w with corn cob starch mixing material had an effect on increasing the tensile strength value and decreasing the elongation value of the plastic. The addition of CMC concentration as much as 20%-60% w/b starch with corn cob starch blending material has an effect on increasing the percent weight loss of biodegradable plastics.

References

Amin, M. R., Chowdhury, M. A., & Kowser, M. A. (2019). Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch. Heliyon, 5(8). https://doi.org/10.1016/j.heliyon.2019.e02009

An, D., & Hwang YI, Cho SH, L. D. S. (1998). Packaging of fresh curled lettuce and cucumber by using LDPE impregnated with antimicrobial Agents. Journal of Korean Society on Food Sci Ence and Nutrition, 27(4), 675–681. Retrieved from https://koreascience.kr/article/JAKO199811920155133.page

Cai, Z., Wu, J., Du, B., & Zhang, H. (2018). Impact of distribution of carboxymethyl substituents in the stabilizer of carboxymethyl cellulose on the stability of acidified milk drinks. Food Hydrocolloids, 76, 150–157. https://doi.org/10.1016/j.foodhyd.2016.12.034

Choi, I., Chang, Y., Shin, S. H., Joo, E., Song, H. J., Eom, H., & Han, J. (2017). Development of biopolymer composite films using a microfluidization technique for carboxymethylcellulose and apple skin particles. International Journal of Molecular Sciences, 18(6), 1278. https://doi.org/10.3390/ijms18061278

Delvia, V. (2006). Kajian Pengaruh Penambahan Dietilen Glikol Sebagai Pemlastis Pada Karakteristik Bioplastik dari Poli-Î’-Hidroksialkanoat (Pha) Yang Dihasilkan Ralstronia Eutropha Pada Substrat Hidrolisat Pati Sagu. Fakultas Teknologi Pertanian Institut Pertanian Bogor.

Elean, S., Saleh, C., & Hindryawati, N. (2018). Pembuatan Film Biodegradable Dari Pati Biji Cempedak Dan Carboxy Methyl Cellulose Dengan Penambahan Gliserol. Jurnal Atomik, 3(2), 122–126. Retrieved from http://jurnal.kimia.fmipa.unmul.ac.id/index.php/JA/article/view/703

Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7). https://doi.org/10.1126/sciadv.1700782

Haryati, S., Septia Rini, A., & Safitri, Y. (2017). Pemanfaatan biji durian sebagai bahan baku plastik biodegradable dengan plasticizer giserol dan bahan pengisi CaCO3. Jurnal Teknik Kimia, 23(1), 1–8. Retrieved from http://ejournal.ft.unsri.ac.id/index.php/JTK/article/view/719

Hasanah, Y. R., Khasanah, U. U., Wibiana, E., & Haryanto. (2016). Pengaruh penambahan cmc (carboxy methyl cellulose) terhadap tingkat degradibilitas dan struktur permukaan plastik ramah lingkungan. Simposium Nasional Teknologi Terapan (SNTT), 4, 373–380. Retrieved from https://123dok.com/document/q776gevq-pengaruh-penambahan-cellulose-terhadap-degradibilitas-struktur-permukaan-lingkungan.html

Hong, S. I., Park, J. D., & Kim, D. M. (2000). Antimicrobial and physical properties of food packaging films incorporated with some natural compounds. Food Science and Biotechnology, 9(1), 38–42. Retrieved from https://www.earticle.net/Article/A86032

Hudha, M. I., Kartika Dewi, R., & Janna Fitri, R. (2020). Potensi Limbah Kehu (Whey) Sebagai Bahan Pembuatan Plastik Pengemas yang Ramah Lingkungan. Jurnal Teknik: Media Pengembangan Ilmu Dan Aplikasi Teknik, 19(1), 46–52. https://doi.org/10.26874/jt.vol19no01.133

Kamsiati, E., Herawati, H., & Purwani, E. Y. (2017). Potensi Pengembangan Plastik Biodegradable Berbasis Pati Sagu dan Ubi Kayu di Indonesia. Jurnal Litbang Pertanian, 36(2), 67–76. https://doi.org/10.21082/jp3.v36n2.2017.p67-76

Kaza, S., Yao, L. C., Bhada-Tata, P., & Woerden, F. (2018). What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050, Urban Development Series. In World Bank: Urban Development Series. Washington DC, USA.

Krisnadi, R., Handarni, Y., & Udyani, K. (2019). Pengaruh jenis plasticizer terhadap karakteristik plastik biodegradable dari bekatul padi. Prosiding Seminar Nasional Sains Dan Teknologi Terapan, 125–130. Retrieved from http://ejurnal.itats.ac.id/sntekpan/article/view/566

Marichelvam, Jawaid, & Asim. (2019). Corn and Rice Starch-Based Bio-Plastics as Alternative Packaging Materials. Fibers, 7(4), 32. https://doi.org/10.3390/fib7040032

Martina, S. P. (2016). Analisis Plastik Biodegradable Berbahan Dasar Nasi Aking. JIPF (Jurnal Ilmu Pendidikan Fisika), 1(1), 9. https://doi.org/10.26737/jipf.v1i1.53

Ningsih, E. P., Ariyani, D., & Sunardi, S. (2019). Pengaruh Penambahan Carboxymethyl Cellulose Terhadap Karakteristik Bioplastik Dari Pati Ubi Nagara (Ipomoea batatas L.). Indo. J. Chem. Res., 7(1), 77–85. https://doi.org/10.30598//ijcr.2019.7-sun

Pane, D. S. S., Amri, I., & Zutiniar. (2019). Pengaruh Konsentrasi Filler Serat Daun Nanas (Ananas comosus) dan PVA (Polivinil Alkohol) pada Sintesis Bioplastik dari Pati Biji Nangka. Jom FTEKNIK, 6, 1–7. Retrieved from https://jnse.ejournal.unri.ac.id/index.php/JOMFTEKNIK/article/view/23220

Pujiani, Isa, I., & Mangara, S. (2014). Biokonversi Selulosa Dari Tongkol Jagung Menjadi Alkohol. In Jurusan Pendidikan Kimia. FMIPA. UNG (Vol. 6, Issue 6, pp. 1–12). Retrieved from https://repository.ung.ac.id/get/simlit_res/1/474/Biokonversi-Selulosa-Dari-Tongkol-Jagung-Menjadi-Alkohol-Penulis2.pdf

Rifaldi, A., Hs, I., & Bahruddin. (2017). Sifat Dan Morfologi Bioplastik Berbasis Pati Sagu Dengan Penambahan Filler Clay Dan Plasticizer Gliserol. Jom FTEKNIK, 4(1), 1–7. Retrieved from https://jom.unri.ac.id/index.php/JOMFTEKNIK/article/view/14727

Rizki, V., Amraini, S. Z., & Bahruddin, B. (2019). Pembuatan Komposit Plastik Pati Sagu-Carboxymethyl Cellulose Dengan Penambahan Plasticizer Gliserol. Jurnal Online Mahasiswa (JOM), 6, 1–6. Retrieved from https://jnse.ejournal.unri.ac.id/index.php/JOMFTEKNIK/article/view/23222

Rodrigues, E. J. D. R., Neto, R. P. C., Sebastião, P. J. O., & Tavares, M. I. B. (2018). Realâ€time monitoring by proton relaxometry of radical polymerization reactions of acrylamide in aqueous solution. Polymer International, 67(6), 675–683. https://doi.org/10.1002/pi.5546

Sitompul, A. J. W. S., & Zubaidah, E. (2017). Pengaruh jenis dan konsentrasi plasticizer terhadap sifat fisik edible film kolang kaling (Arenga pinnata). Jurnal Pangan Dan Agroindustri, 5(1), 13–25. Retrieved from https://www.jpa.ub.ac.id/index.php/jpa/article/download/494/372

Susilowati, E., & Lestari, A. E. (2019). Pembuatan dan Karakterisasi Edible Film Kitosan Pati Biji Alpukat (KIT-PBA). JKPK (Jurnal Kimia Dan Pendidikan Kimia), 4(3), 197. https://doi.org/10.20961/jkpk.v4i3.29846

Zuwanna, I., Fitriani., & Meilina. (2017). Pengemas Makanan Ramah Lingkungan Berbasis Limbah Cair Tahu (Whey) Sebagai Edible Film. Prosiding Seminar Nasional Pascasarjana (SNP) Unsyiah. Retrieved from https://jurnal.usk.ac.id/SNP-Unsyiah/article/view/6870

Author Biographies

M. Bayu Ihsan, Universitas Negeri Padang

Ratnawulan, Universitas Negeri Padang

License

Copyright (c) 2023 M. Bayu Ihsan, Ratnawulan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).