Utilization of Fly Ash Waste in the Cement Industry and its Environmental Impact: A Review
DOI:
10.29303/jppipa.v9i9.4504Published:
2023-09-25Issue:
Vol. 9 No. 9 (2023): SeptemberKeywords:
Cement industry, Environment, Fly ash, ImpactReview
Downloads
How to Cite
Downloads
Metrics
Abstract
The cement industry is one of the most important industries in the development of a country. However, the production activities of the cement industry also cause significant environmental impacts, one of which is air pollution. One of the by-products of fuel combustion in the cement industry is fly ash, which if not managed properly can pollute the air and the surrounding environment. This research aims to provide an overview of the environmental impacts of using fly ash in the cement industry, especially in relation to air pollution. This research uses the literature review method, which is by collecting and reviewing literature or documents related to the research topic. The data sources used in this research are scientific journals, books, and other related documents. Data analysis in this study was carried out by reviewing and examining literature or documents related to the research topic, then summarizing and compiling the results of the analysis into an overview. Based on the results of this study, it can be concluded that the use of fly ash in the cement industry has significant environmental impacts, especially related to air pollution. However, there are several technologies and fly ash processing methods that can reduce the environmental impact of cement industry production activities, such as the use of fly ash as raw material for making lightweight concrete or as raw material for the production of other building materials.
References
Aditya, F. (2019). Pengaruh Penggunaan Matos dan Fly Ash sebagai Bahan Stabilisasi Tanah Berbutir Halus Ditinjau dari Nilai Kuat Geser dan Permeabilitas (Skripsi). Universitas Islam Indonesia. Retrieved from https://dspace.uii.ac.id/bitstream/handle/123456789/36414/14511204%20Fachrudin%20aditya.pdf?sequence=1&isAllowed=y
Adriano, D. C., Page, A. L., Elseewi, A. A., Chang, A. C., & Straughan, I. (1980). Utilization and Disposal of Fly Ash and Other Coal Residues in Terrestrial Ecosystems: A Review. Journal of Environmental Quality, 9(3), 333–344. https://doi.org/10.2134/jeq1980.00472425000900030001x
Afifah, W. N. (2014). Dampak Negatif Industri PT. Semen Indonesia terhadap Masyarakat Desa Temandang. Paradigma, 2(1), 1-7. Retrieved from https://ejournal.unesa.ac.id/index.php/paradigma/article/view/6667
Ahmaruzzaman, M. (2009). Role of Fly Ash in the Removal of Organic Pollutants from Wastewater. Energy and Fuels, 23(3), 1494–1511. https://doi.org/10.1021/ef8002697
Al Bakri A. M. M., Jamaludin, L., Kamarudin, H., Binhussain, M., Ruzaidi Ghazali, C. M., & Ahmad, M. I. (2013). Study on Fly Ash Based Geopolymer for Coating Applications. Advanced Materials Research, 686, 227–233. https://doi.org/10.4028/www.scientific.net/AMR.686.227
Al Bakri, A. M. M., Kamarudin, H., Bnhussain, M., Khairul Nizar, I., Rafiza, A. R., & Zarina, Y. (2012). The Processing, Characterization, and Properties of Fly Ash Based Geopolymer Concrete. Advanced Study Center Co.Ltd, 30, 90–97. Retrieved from https://www.ipme.ru/e-journals/RAMS/no_13012/05_bakri.pdf
American Coal Ash Association. (2003). Fly Ash Facts for Highway Engineers. USA: Department of Transportation. Retrieved from https://www.fhwa.dot.gov/pavement/recycling/fafacts.pdf
Anggara, F., Petrus, H. T. B. M., Besari, D. A. A., Manurung, H., & Saputra, F. Y. A. (2021). Tinjauan Pustaka Karakterisasi dan Potensi Pemanfaatan Fly Ash dan Bottom Ash (FABA). Buletin Sumber Daya Geologi, 16(1), 53–70. https://doi.org/10.47599/bsdg.v16i1.320
Anwar, F. S., Mallongi, A., & Maidin, M. A. (2019). Kualitas Udara Ambien CO dan TSP di Permukiman Sekitar Kawasan Industri PT. Semen Tonasa. Jurnal Kesehatan Masyarakat Maritim, 2(2), 84-93. https://doi.org/10.30597/jkmm.v2i1.10060
ASTM C618-03. (2003). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. Retrieved from www.astm.org
ASTM C618-12A. (2014). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. https://doi.org/10.1520/C0618-12a
Badan Standarisasi Nasional. (2022). Spesifikasi Timbunan Pilihan dan Lapis Fondasi Menggunakan Abu Batu Bara (Fly Ash dan Bottom Ash/FABA). Badan Standarisasi Nasional. Jakarta. Retrieved from https://pesta.bsn.go.id/produk/detail/14023-sni90922022
Baidya, R., Ghosh, S. K., & Parlikar, U. V. (2016). Co-Processing of Industrial Waste in Cement Kiln – A Robust System for Material and Energy Recovery. Procedia Environmental Sciences, 31, 309–317. https://doi.org/10.1016/j.proenv.2016.02.041
Baidya, R., Ghosh, S. K., & Parlikar, U. V. (2017). Sustainability of Cement Kiln Co-Processing of Wastes in India: A Pilot Study. Environmental Technology (United Kingdom), 38(13–14), 1650–1659. https://doi.org/10.1080/09593330.2017.1293738
Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M. (2020). Environmental Impact Assessment of Fly Ash and Silica Fume Based Geopolymer Concrete. Journal of Cleaner Production, 254, 120147. https://doi.org/10.1016/j.jclepro.2020.120147
Darmayani, S., Tribakti, I., Musa, B., Satriawan, D., Rustiah, W., Helilusiatiningsih, N., Sahabuddin, E. S., Putra, R. P., Rahmawati, R., Idewadi, F. M., & Cundaningsih, N. (2023). Kimia Lingkungan. Padang: PT. Global Eksekutif Teknologi. Retrieved from https://www.researchgate.net/profile/Fathan-Dewadi/publication/370631307
Dontriros, S., Likitlersuang, S., & Janjaroen, D. (2020). Mechanisms of Chloride and Sulfate Removal from Municipal-Solid-Waste-Incineration Fly Ash (MSWI FA): Effect of Acid-Base Solutions. Waste Management, 101, 44-53. https://doi.org/10.1016/j.wasman.2019.09.033
Ekaputri, J. J., Lie, H. A., Fujiyama, C., Shovitri, M., Alami, N. H., & Setiamarga, D. H. E. (2019). The Effect of Alkali Concentration on Chloride Penetration in Geopolymer Concrete. IOP Conference Series: Materials Science and Engineering, 615(1). https://doi.org/10.1088/1757-899X/615/1/012114
Ekaputri, J. J., Shahib, M., & Bari, A. (2020). Perbandingan Regulasi Fly Ash sebagai Limbah B3 di Indonesia dan Beberapa Negara. In Media Komunikasi Teknik Sipil, 26(2), 150-162. https://doi.org/10.14710/mkts.v26i2.30762
Fansuri, H. (2019). Material untuk Energi dan Lingkungan: Membran Berbasis Oksida Perovskit Dan Geopolimer (Orasi Ilmiah). Institut Teknologi Sepuluh Nopember. Retrieved from https://www.researchgate.net/publication/337404319
Febriyani, N. H. (2022). Politik Hukum dan Pertanggungjawaban Pidana Korporasi Pasca Penghapusan Status Limbah Fly Ash dan Bottom Ash Batubara dari Kategori Limbah Bahan Berbahaya dan Beracun (B3) Menjadi Limbah Non-B3 (Skripsi). Universitas Sebelas Maret. Retrieved from https://digilib.uns.ac.id/dokumen/detail/88783
Ferdian, I., Faizal, M., & Hasanudin, H. (2023). Potensi Fly Ash dan Bottom Ash sebagai Sumber Alternatif Top Soil di Lahan Reklamasi Pasca Tambang Batubara. Jurnal Penelitian Sains, 25(1), 81-88. https://doi.org/10.56064/jps.v25i1.793
Gamage, N., Liyanage, K., Fragomeni, S., & Setunge, S. (2011). Overview of Different Types of Fly Ash and Their Use as a Building and Construction Material. Conference: International Conference of Structural Engineering, Construction and Management. Kandy, Sri Lanka. Retrieved from https://www.researchgate.net/publication/264707671
Gobel, A. P., Nursanto, E., & Ratminah, W. D. (2018). Efektifitas Pemanfaatan Fly Ash Batubara sebagai Adsorben dalam Menetralisir Air Asam Tambang Pada Settling Pond Penambangan Banko PT. Bukit Asam (Persero), Tbk. Jurnal Mineral, Energi Dan Lingkungan, 2(1), 1–11. Retrieved from http://jurnal.upnyk.ac.id/
Gollakota, A. R. K., Volli, V., & Shu, C. M. (2019). Progressive Utilisation Prospects of Coal Fly Ash: A Review. Science of the Total Environment, 672, 951–989. Elsevier B. V. https://doi.org/10.1016/j.scitotenv.2019.03.337
Hadipramana, J., & Syahputra, J. (2019). Perbandingan Simulasi Gaya Aksial dan Lateral Plain Wall Beton Ringan antara Campuran Styrofoam dengan Lapisan Coating dan Abu Sekam Padi Dengan Fly Ash. Civil Engineering Journal, 1(2), 8-19. Retrieved from https://jurnal.umsu.ac.id/index.php/PCEJ/article/view/5871
Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2016). Fly Ash Based Geopolymer Concrete. Australian Journal of Structural Engineering, 6(1), 77–85. https://doi.org/10.1080/13287982.2005.11464946
Haryanti, N. H. (2017). Uji Abu Terbang PLTU Asam Asam sebagai Bahan Pembuatan Bata Ringan. Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat, 11(2), 127-137. http://dx.doi.org/10.20527/flux.v11i2.2675
Hasanbeigi, A., Lu, H., Williams, C., & Price, L. (2012). International Best Practices for Pre-Processing and Co-Processing Municipal Solid Waste and Sewage Sludge in the Cement Industry. Orlan=do: Ernest Orlando lawrence berkeley national laboratory lbnl-xxxx. Retrieved from https://www.osti.gov/servlets/purl/1213537
Indriyati, T. S., Alfian Malik, & Yosi Alwinda. (2019). Kajian Pengaruh Pemanfaatan Limbah (Fly ASh dan Bottom Ash) pada Konstruksi Lapisan Base Perkerasan Jalan. Jurnal Teknik, 13(2), 112–119. https://doi.org/10.31849/teknik.v13i2.3596
Kartikasari, D., & Hartantyo, S. D. (2017). Penggantian Filler dengan Fly Ash dan Serbuk Batu Bata pada Campuran Aspal (Ac-Wc) Filler Replacement With Fly Ash and Brick Powder in Mix of Asphalt (Ac-Wc). UKaRsT, 1(1), 40-49. https://doi.org/10.30737/ukarst.v1i1.259
Kaya, M., Uysal, M., Yilmaz, K., Karahan, O., & Atis, C. D. (2020). Mechanical Properties of Class C and F Fly Ash Geopolymer Mortars. Gradjevinar, 72(4), 297–309. https://doi.org/10.14256/JCE.2421.2018
Kitto, J. B., & Stultz, S. C. (2005). Steam: Its Generation and Use (41st Edition). Barberton: Babcock & Wilcox Company.
KLHK. (2021a). Regulation of the Minister of Environment and Forestry Number 6 of 2021 concerning Procedures for Management of Hazardous and Toxic Waste. Retrieved from https://kukuh.menlhk.go.id/userportal/cms/publikasi/peraturan/411bb469ce96993150564af5f5412214.pdf
KLHK. (2021b). Regulation of the Minister of Environment and Forestry Number 19 of 2021 concerning Procedures for Management of Non-Hazardous and Toxic Waste. Retrieved from https://jdih.maritim.go.id/id/permen-lhk-no-19-tahun-2021
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2007). Comparative Performance of Geopolymers Made with Metakaolin and Fly Ash After Exposure to Elevated Temperatures. Cement and Concrete Research, 37(12), 1583–1589. https://doi.org/10.1016/j.cemconres.2007.08.021
Kusdiyono, K., Supriyadi, S., & Wahyono, H. L. (2017). Pengaruh Penambahan Fly Ash dan Bottom Ash pada Pembuatan Beton Mutu f’c 20 Mpa dalam Upaya Pemanfaatan Limbah Industri. Wahana Teknik Sipil, 22(1), 40–49. http://dx.doi.org/10.32497/wahanats.v22i1.899
Lahiri, S. S. (2022). Fly Ash: Safety and Health Issues (in Handbook of Fly Ash). https://doi.org/10.1016/C2018-0-01655-2
Lu, X., Liu, B., Zhang, Q., Wen, Q., Wang, S., Xiao, K., & Zhang, S. (2023). Recycling of Coal Fly Ash in Building Materials: A Review. Minerals, 13(1). https://doi.org/10.3390/min13010025
Luo, Y., Zheng, S., Ma, S., Liu, C., & Wang, X. (2017). Ceramic Tiles Derived from Coal Fly Ash: Preparation and Mechanical Characterization. Ceramics International, 43(15), 11953–11966. https://doi.org/10.1016/j.ceramint.2017.06.045
Marinković, S., & Dragaš, J. (2018). Fly Ash. In Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications (pp. 325–360). Elsevier. https://doi.org/10.1016/B978-0-08-102156-9.00011-0
Marthinus, A. P., Sumajouw, M. D. J., & Windah, R. S. (2015). Pengaruh Penambahan Abu Terbang (Fly Ash) terhadap Kuat Tarik Belah Beton. Jurnal Sipil Statik, 3(11), 729–736. Retrieved from https://ejournal.unsrat.ac.id/index.php/jss/article/view/10662
Mathapati, M., Amate, K., Prasad, C. D., Jayavardhana, M. L., & Raju, T. H. (2021). A Review on Fly Ash Utilization. Materials Today: Proceedings, 50, 1535–1540. https://doi.org/10.1016/j.matpr.2021.09.106
Meij, R. (1994). Trace Element Behavior in Coal-Fired Power Plants. Fuel Processing Technology, 39(1-3), 199-217. https://doi.org/10.1016/0378-3820(94)90180-5
Mufrodi, Z., Widiastuti, N., & Kardika, R. C. (2008). Adsorpsi Zat Warna Tekstil dengan Menggunakan Abu Terbang (Fly Ash) untuk Variasi Massa Adsorben dan Suhu Operasi. In Prosiding Seminar Nasional Teknoin. Retrieved from https://journal.uii.ac.id/Teknoin/article/view/2082
Muji, W., & Wahyudi, W. (2018). Analisis Unsur dalam Fly Ash dari Industri PLTU Batubara dengan Metode Analisis Aktivasi Neutron. Jurnal Teknologi Lingkungan, 19(2), 221-226. Retrieved from https://ejurnal.bppt.go.id/index.php/JTL/article/download/2778/pdf/6612
Munir, M. (2008). Pemanfaatan Abu Batubara (Fly Ash) untuk Hollow Block yang Bermutu dan Aman bagi Lingkungan (Thesis). Program Magister Ilmu Lingkungan, Universitas Diponegoro, Semarang. Retrieved from http://eprints.undip.ac.id/18161/
Mustafa Al Bakria, A. M., Kamarudin, H., Bin Hussain, M., Khairul Nizar, I., Zarina, Y., & Rafiza, A. R. (2011). The Effect of Curing Temperature on Physical and Chemical Properties of Geopolymers. Physics Procedia, 22, 286–291. https://doi.org/10.1016/j.phpro.2011.11.045
Namkane, K., Naksata, W., Thiansem, S., Sooksamiti, P., & Arqueropanyo, O. (2016). Utilization of Coal Bottom Ash as Raw Material for Production of Ceramic Floor Tiles. Environmental Earth Sciences, 75(5), 1–11. https://doi.org/10.1007/s12665-016-5279-0
Nugroho, E. H. (2010). Analisis Porositas dan Permeabilitas Beton dengan Bahan Tambah Fly Ash untuk Perkerasan Kaku (Rigid Pavement) (Skripsi). Universitas Negeri Sebelas Maret. Retrieved from https://digilib.uns.ac.id/dokumen/detail/15598/Analisis-porositas-dan-permeabilitas-beton-dengan-bahan-tambah-fly-ash-untuk-perkerasan-kaku-rigid-pavement
Nurwaskito, A., Amril, F., & Widodo, S. (2015). Analisis Kualitas Batugamping sebagai Bahan Baku Utama Semen Portland pada PT. Semen Tonasa Provinsi Sulawesi Selatan. Jurusal Teknik Pertambangan Universitas Muslim Indonesia, 2(1), 117–123. https://doi.org/10.33536/jg.v2i1.33
Olii, M. R., Wahab, A. A., Ichsan, I., Djau, R. A., & Nento, S. (2023). Beton Hijau Menggunakan Fly Ash sebagai Subtitusi Parsial Semen. Siklus: Jurnal Teknik Sipil, 9(1), 11-20. https://doi.org/10.31849/siklus.v9i1.11101
Pandeleke, R. E. (2014). Kajian Experimental Sifat Karekteristik Mortar yang Menggunakan Abu Ampas Tebu sebagai Substitusi Parsial Semen. Tekno, 12(60), 57-63. Retrieved from https://ejournal.unsrat.ac.id/index.php/tekno/article/view/5599
Pratiwi, W. D., Triwulan, T., Ekaputri, J. J., & Fansuri, H. (2020). Combination of Precipitated-Calcium Carbonate Substitution and Dilute-Alkali Fly Ash Treatment in a Very High-Volume Fly Ash Cement Paste. Construction and Building Materials, 234. https://doi.org/10.1016/j.conbuildmat.2019.117273
PUPR, K. (2022). Timbunan Pilihan dan Lapis Fondasi Menggunakan Abu Batu Bara/ Fly Ash dan Bottom Ash (FABA). Kementerian Pekerjaan Umum dan Perumahan Rakyat. Jakarta.
Purnawan, I., & Prabowo, A. (2017). Pengaruh Penambahan Limestone terhadap Kuat Tekan Semen Portland Komposit. Jurnal Rekayasa Proses, 11(2), 86–93. Retrieved from https://jurnal.ugm.ac.id/jrekpros/article/view/31136/19615
Putra, W. A., Olivia, M., & Saputra, E. (2020). Ketahanan Beton Semen Portland Composite Cement (PCC) di Lingkungan Gambut Kabupaten Bengkalis. Jurnal Teknik, 14(1), 27–34. https://doi.org/10.31849/teknik.v14i1.3882
Rastogi, A., & Paul, V. K. (2020). A Critical Review of the Potential for Fly Ash Utilization in Construction-Specific Applications in India. Environmental Research, Engineering and Management, 76(2), 65–75. https://doi.org/10.5755/J01.EREM.76.2.25166
Romli, A. (2020). Pemanfaatan Fly Ash (Abu Terbang) Batubara untuk Pembuatan Semen Portland Pozzolan. Jurnal Teknik: Media Pengembangan Ilmu dan Aplikasi Teknik, 9(1), 1–6. https://doi.org/10.26874/jt.vol9no1.342
Saidy, A. R., & SP, M. A. (2021). Stabilisasi Bahan Organik Tanah: Peningkatan Kesuburan Tanah dan Penurunan Emisi Gas Rumah Kaca. Deepublish.
Saikia, N., Kato, S., & Kojima, T. (2006). Compositions and Leaching Behaviors of Combustion Residues. Fuel, 85, 264–271. https://doi.org/10.1016/j.fuel.2005.03.035
Sandanayake, M., Gunasekara, C., Law, D., Zhang, G., Setunge, S., & Wanijuru, D. (2020). Sustainable Criterion Selection Framework for Green Building Materials–An Optimisation Based Study of Fly-Ash Geopolymer Concrete. Sustainable Materials and Technologies, 25, e00178. https://doi.org/10.1016/j.susmat.2020.e00178
Sapulete, A. C., Lie, H. A., & Priastiwi, Y. A. (2018). Sustainability Beton Metode Life Cycle Assessment Studi Kasus: Limbah Beton Laboratorium Bahan dan Konstruksi Departemen Teknik Sipil Universitas Diponegoro Semarang. Media Komunikasi Teknik Sipil, 24(2), 140–147. https://doi.org/10.14710/mkts.v24i2.18863
Saputra, I. (2019). Kuat Tekan Mortar Semen dengan Campuran Semen, Abu Terbang (Fly Ash) dan Metakaolin Menggunakan Air Kulong (Doctoral dissertation). Universitas Bangka Belitung.
Sommerville, R., Blissett, R., Rowson, N., & Blackburn, S. (2013). Producing A Synthetic Zeolite from Improved Fly Ash Residue. International Journal of Mineral Processing, 124, 20–25. https://doi.org/10.1016/j.minpro.2013.07.005
Sulasmi, S., Hasanbasri, M., & Rustamaji, R. (2022). Indentifikasi Dampak Industri Semen yang Merugikan Masyarakat. In Prosiding SNPBS (Seminar Nasional Pendidikan Biologi dan Saintek), 280-289. Retrieved from https://proceedings.ums.ac.id/index.php/snpbs/article/view/1770
Sulistyowati, N. A. (2013). Bata Beton Berlubang dari Abu Batubara (Fly Ash dan Bottom Ash) yang Ramah Lingkungan. Jurnal Teknik Sipil & Perencanaan, 15(1), 87–96. https://doi.org/10.15294/jtsp.v15i1.7117
Temuujin, J., & Riessen, A. V. (2009). Effect of Fly Ash Preliminary Calcination on the Properties of Geopolymer. Journal of Hazardous Materials, 164(2–3), 634–639. https://doi.org/10.1016/j.jhazmat.2008.08.065
Thokchom, S., Ghosh, P., & Ghosh, S. (2009). Resistance of Fly Ash Based Geopolymer Mortars in Sulfuric Acid. ARPN Journal of Engineering and Applied Sciences, 4(1), 65–70. Retrieved from www.arpnjournals.com
Tiwary, A., Sharma, G., & Gupta, P. K. (2014). Quantification of the Reduced Environmental Impacts with Use of Co-Processing in Cement Kilns in India. Environmental Research, Engineering and Management, 69(3). https://doi.org/10.5755/j01.erem.69.3.6736
Umboh, A. H., Sumajouw, M. D. J., & Windah R. S. (2014). Pengaruh Pemanfaatan Abu Terbang (Fly Ash) dari PLTU II Sulawesi Utara sebagai Substitusi Parsial Semen terhadap Kuat Tekan Beton. Jurnal Sipil Statik, 2(7), 352–358. Retrieved from https://ejournal.unsrat.ac.id/index.php/jss/article/view/6006
Waani, J. E., & Elisabeth, L. (2017). Substitusi Material Pozolan terhadap Semen pada Kinerja Campuran Semen. Jurnal Teknik Sipil, 24(3), 237–246. https://doi.org/10.5614/jts.2017.24.3.7
Wahyudi, R. S. (2022). Kewajiban Pemerintah Daerah dan Badan Usaha dalam Penanggulangan dan Pemulihan Kerusakan Lingkungan Hidup Kabupaten Cilacap. MORALITY: Jurnal Ilmu Hukum, 8(2), 188-208. http://dx.doi.org/10.52947/morality.v8i2.256
Wang, J. J., Wang, Y. F., Sun, Y. W., Tingley, D. D., & Zhang, Y. R. (2017). Life Cycle Sustainability Assessment of Fly Ash Concrete Structures. Renewable and Sustainable Energy Reviews, 80, 1162–1174. https://doi.org/10.1016/j.rser.2017.05.232
WBCSD. (2015). The Cement Sustainability Initiative: 10 Years of Progress - Moving On To the Next Decade. Retrieved from https://docs.wbcsd.org/2015/11/CSI-10YearsOfProgress.pdf
Winarno, H., Muhammad, D., Ashyar, R., & Wibowo, Y. G. (2019). Pemanfaatan Limbah Fly Ash dan Bottom Ash dari PLTU SUMSEL-5 sebagai Bahan Utama Pembuatan Paving Block. Jurnal Teknika, 11(1), 1067–1070. https://doi.org/10.30736/jt.v11i1.288
Wons, W., Rzepa, K., Reben, M., Murzyn, P., Sitarz, M., & Olejniczak, Z. (2018). Effect of Thermal Processing on the Structural Characteristics of Fly Ashes. Journal of Molecular Structure, 1165, 299-304. https://doi.org/10.1016/j.molstruc.2018.04.008
Xue, Y., & Liu, X. (2021). Detoxification, Solidification and Recycling of Municipal Solid Waste Incineration Fly Ash: A Review. Chemical Engineering Journal, 420(11), 130349. https://doi.org/10.1016/j.cej.2021.130349
Yang, Z., Chang, G., Xia, Y., He, Q., Zeng, H., Xing, Y., & Gui, X. (2021). Utilization of Waste Cooking Oil for Highly Efficient Recovery of Unburned Carbon from Coal Fly Ash. Journal of Cleaner Production, 282. https://doi.org/10.1016/j.jclepro.2020.124547
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015). A Comprehensive Review on the Applications of Coal Fly Ash. Earth-Science Reviews, 141, 105–121. https://doi.org/10.1016/j.earscirev.2014.11.016
Yu, X., Cui, Y., Chen, Y., Chang, I. S., & Wu, J. (2022). The Drivers of Collaborative Innovation of the Comprehensive Utilization Technologies of Coal Fly Ash in China: A Network Analysis. Environmental Science and Pollution Research, 29(37), 56291–56308. https://doi.org/10.1007/s11356-022-19816-5
Author Biographies
Ratih Permatasari, School of Environmental Science, University of Indonesia, Jakarta, Indonesia
Ahyahudin Sodri, University Indonesia
Haruki A gustina, University Indonesia
License
Copyright (c) 2023 Ratih Permatasari
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).