Non-Burning Bricks with Natural Materials Environmentally Friendly
DOI:
10.29303/jppipa.v9i7.4718Published:
2023-07-25Issue:
Vol. 9 No. 7 (2023): JulyKeywords:
Brick, Compressive strength, Economical, Environmentally friendly, No burningResearch Articles
Downloads
How to Cite
Downloads
Metrics
Abstract
The city of Bima is an area that produces quite a lot of bricks with favorable natural conditions, most of the area consists of rice fields and has a soil texture suitable for making bricks. Red brick is the most widely produced type of brick with a total of 20,000 bricks per month and its use has a negative impact on the environment because it produces carbon dioxide (CO2) emissions which pollute the air and contribute to the greenhouse effect which causes global warming, also as a result of burning bricks. . Based on this, researchers are trying to conduct research related to building materials in Bima City in the form of brick innovations with more environmentally friendly basic materials. The research was carried out using a true experiment and cross sectional approach using conventional bricks as a standard for quality comparison. Descriptive analysis was chosen as the method of analysis in this study. From the results of brick quality tests, all brick formulas met the requirements for water content (<15%), four of the six formulas met the compressive strength requirements based on SNI. The average compressive strength of the four formulas is >5 MPa and meets the Indonesian national brick breaking strength standard (SNI-0021-78). The most significant advantage seen from brick products without burning is the lower water content than conventional bricks and is more environmentally friendly because it uses natural materials and is obtained at competitive prices
References
Almssad, A., Almusaed, A., & Homod, R. Z. (2022). Masonry in the Context of Sustainable Buildings: A Review of the Brick Role in Architecture. Sustainability, 14(22), 14734. https://doi.org/10.3390/su142214734
Eliche-Quesada, D., Felipe-Sesé, M. A., López-Pérez, J. A., & Infantes-Molina, A. (2017). Characterization and evaluation of rice husk ash and wood ash in sustainable clay matrix bricks. Ceramics International, 43(1), 463–475. https://doi.org/10.1016/j.ceramint.2016.09.181
Fauzan, F. (2019). Analisis Potensi Sektor Pariwisata Di Kota Bima Provinsi Nusa Tenggara Barat Periode (NTB) [Fakultas Ekonomi dan Bisnis UIN Jakarta]. Retrieved from https://repository.uinjkt.ac.id/dspace/bitstream/123456789/47771/1/FITRIADI FAUZAN-FEB.pdf
Haris, H. M., & Tahir, S. (2020). Studi Eksperimental Kuat Tekan Beton Dengan Mensubtitusikan Limbah Batu Bata Pada Semen. Siimo Engineering: Journal Teknik Sipil, 4(1), 39–52. https://doi.org/10.31934/siimo.v4i1.1110
Irwansyah, I., F., dan P., & M. (2018). Karakteristik Batu Bata Tanpa Pembakaran Dari Limbah Industri Pertanian Dan Material Alam. Educational Building Jurnal Pendidikan Teknik Bangunan Dan Sipil, 4(2), 7–12. https://doi.org/10.24114/ebjptbs.v4i2
Kaminski, S., Lawrence, A., & Trujillo, D. (2016). Design Guide for Engineered Bahareque Housing. INBAR - Internationar Network for Bamboo and Rattan, 38, 1–84. Retrieved from http://www.inbar.int/sites/default/files/Design Guide for Engineered Bahareque Housing_0.pdf
Khan, I., Rehman, A., Zia, K., Naveed, U., Bibi, S., Sherazi, R., Hussain, I., Rehman, M. U., & Massa, S. (2020). Microbes and Environment: Global Warming Reverting the Frozen Zombies. In Environment, Climate, Plant and Vegetation Growth (pp. 607–633). Springer International Publishing. https://doi.org/10.1007/978-3-030-49732-3_24
Kweku, D., Bismark, O., Maxwell, A., Desmond, K., Danso, K., Oti-Mensah, E., Quachie, A., & Adormaa, B. (2018). Greenhouse Effect: Greenhouse Gases and Their Impact on Global Warming. Journal of Scientific Research and Reports, 17(6), 1–9. https://doi.org/10.9734/JSRR/2017/39630
Milanie, F., Aryza, S., Sitepu, S. A., & Syahfitri, E. S. (2022). Instrumen Percepat Pembangunan Desa Wisata Klambir Lima Dengan Metode Regional Existence Study. In Prosiding Seminar Nasional Sosial, Humaniora, dan Teknologi (pp. 145–150). Retrieved from https://journals.stimsukmamedan.ac.id/index.php/senashtek/article/view/157
Miller, K. D., Ostrom, Q. T., Kruchko, C., Patil, N., Tihan, T., Cioffi, G., Fuchs, H. E., Waite, K. A., Jemal, A., Siegel, R. L., & Barnholtzâ€Sloan, J. S. (2021). Brain and other central nervous system tumor statistics, 2021. CA: A Cancer Journal for Clinicians, 71(5), 381–406. https://doi.org/10.3322/caac.21693
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021). Achieving net zero greenhouse gas emissions in the cement industry via value chain mitigation strategies. One Earth, 4(10), 1398–1411. https://doi.org/10.1016/j.oneear.2021.09.011
Rignot, E. (2021). Sea level rise from melting glaciers and ice sheets caused by climate warming above pre-industrial levels. Physics-Uspekhi, 65(1). https://doi.org/10.3367/UFNe.2021.11.039106
Shen, M., Huang, W., Chen, M., Song, B., Zeng, G., & Zhang, Y. (2020). (Micro) plastic crisis: Un-ignorable contribution to global greenhouse gas emissions and climate change. Journal of Cleaner Production, 254, 120138. https://doi.org/10.1016/j.jclepro.2020.120138
Singh, H., Singh Brar, G., Kumar, H., & Aggarwal, V. (2021). A review on metal matrix composite for automobile applications. Materials Today: Proceedings, 43, 320–325. https://doi.org/10.1016/j.matpr.2020.11.670
SNI. (2000). Standar Nasional Indonesia tentang Kuat Tekan Batu Bata, Jakarta.
SNI. (2002). Metoda Pengujian Kuat Lentur Dinding Pasangan Bata Merah di Laboratorium Balitbang Kimpraswil Bandung.
Vijayan, D. S., Mohan, A., Revathy, J., Parthiban, D., & Varatharajan, R. (2021). Evaluation of the impact of thermal performance on various building bricks and blocks: A review. Environmental Technology & Innovation, 23, 101577. https://doi.org/10.1016/j.eti.2021.101577
Widodo, B., & Artiningsih, N. K. A. (2021). Optimasi Semen Pada Pembuatan Batu Bata Tanpa Bakar. Dinamika Teknik Sipil: Majalah Ilmiah Teknik Sipil, 14(1), 32-40. https://doi.org/10.23917/dts.v14i1.15277
Zaifuddin, Z. (2022). Pemberdayaan Masyarakat Melalui Online Marketing: Penguatan Ekonomi Masyarakat Desa Berbasis Digital. Jurnal Pemberdayaan Masyarakat, 10(1), 31. https://doi.org/10.37064/jpm.v10i1.10044
Author Biographies
Adhi Aqwam, Badan Riset dan Inovasi Daerah Kota Bima
Asryadin, Badan Riset dan Inovasi Daerah Kota Bima
Muhammad Ichwanul Muslimin, Badan Riset dan Inovasi Daerah Kota Bima
Hetti Koes Endang, Badan Riset dan Inovasi Daerah Kota Bima
Rosita, Badan Riset dan Inovasi Daerah Kota Bima
Fahrul Annas, Badan Riset dan Inovasi Daerah Kota Bima
Hasan, Badan Riset dan Inovasi Daerah Kota Bima
Muhammad Rahadian, Badan Riset dan Inovasi Daerah Kota Bima
License
Copyright (c) 2023 Adhi Aqwam, Asryadin, Muhammad Ichwanul Muslimin, Rizka Khairunnisa, Hetti Koes Endang, Rosita, Fahrul Annas, Hasan, Muhammad Rahadian
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).