Analysis of Volumetric Characteristics of Cold Emulsion Asphalt Mixtures on Closed and Open Gradation with Cement and Lime Filler Variations

Authors

I Dewa Made Alit Karyawan , Ratna Yuniarti , Desi Widianty , Fera Fitri Salsabila , Baiq Sulistia Furwati , Baiq Anggun Lola Santi

DOI:

10.29303/jppipa.v10i12.9745

Published:

2024-12-23

Issue:

Vol. 10 No. 12 (2024): December

Keywords:

Aggregate gradation, CAED, Cement filler, Lime filler, Volumetric characteristics

Research Articles

Downloads

How to Cite

Karyawan, I. D. M. A., Yuniarti, R., Widianty, D., Salsabila, F. F., Furwati, B. S., & Santi, B. A. L. (2024). Analysis of Volumetric Characteristics of Cold Emulsion Asphalt Mixtures on Closed and Open Gradation with Cement and Lime Filler Variations. Jurnal Penelitian Pendidikan IPA, 10(12), 10366–10375. https://doi.org/10.29303/jppipa.v10i12.9745

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

Cold Emulsion Asphalt Mixture (CAED) uses unheated emulsified asphalt, thus reducing gas emissions and health risks for workers. Volumetric characteristics and aggregate gradation are very important to assess the quality of CAED. Therefore, the purpose of this study is to examine the volumetric characteristics of CAED, namely Void in Mix (VIM), Void in Mineral Aggregate (VMA), and Void Filled with Bitumen (VFB), with variations in filler (cement, lime) and aggregate gradation (dense, open). The study used a laboratory experimental method, including material preparation, sample preparation with five variations of filler, testing VIM, VMA, and VFB values, and data analysis. This study shows that the volumetric characteristics of CAED with closed and open gradations meet the VMA and VFB specifications, but the VIM value is only met in the closed gradation of CAED with a variation of 50% cement:50%. Better aggregate interlocking in closed gradations results in smaller air voids. Closed gradations are recommended for heavy traffic, while open gradations are suitable for well-drained roads and light traffic

References

Alzara, M., Onyelowe, K. C., Ebid, A. M., Hanandeh, S., Yosri, A. M., & Alshammari, T. O. (2024). Modeling of the Effect of Gradation and Compaction Characteristics on the California Bearing Ratio of Granular Materials for Subbase and Landfill Liner Construction. Scientific Report, 14. https://doi.org/10.1038/s41598-024-74106-z 1

Anas, M. N., Siswanto, H., & Rahardjo, B. (2020). Analysis of Asphalt Concrete Wearing Course Made with Asphalt Polyurethane Modifier Analysis of Asphalt Concrete Wearing Course Made with Asphalt Polyurethane Modifier. Journal of Physics: Conference Series, 1–5. https://doi.org/10.1088/1742-6596/1858/1/012044

Ayun, Q., & Prastyanto, C. A. (2021). Analisis Pengaruh Variasi Gradasi Aspal Porus Terhadap Parameter Marshall dan Permeabilitas. Jurnal Aplikasi Teknik Sipil, 19(1), 55–64. https://doi.org/10.12962/j2579-891X.v19i1.8482

Gusty, S. (2024). Optimalisasi Kinerja Campuran Aspal Porus (Variasi Gradasi Agregat dan Pemanfaatan Limbah Oli). Makassar: Arsy Media. Retrieved from https://repository.unifa.ac.id/id/eprint/1140/

Hamzah, R. A., Kaseke, O. H., & Manoppo, M. M. (2016). Pengaruh Variasi Kandungan Bahan Pengisi Terhadap Kriteria Marshall pada Campuran Beraspal Panas Jenis Lapis Tipis Aspal Beton – Lapis Aus Gradasi Senjang. Jurnal Sipil Statik, 4(7), 447–452. Retrieved from https://ejournal.unsrat.ac.id/v2/index.php/jss/article/view/13167

Hartanto, A., Sugiharto, I., Wulandari, P. S., & Patmadjaja, H. (2016). Analisa Karakteristik Campuran Aspal Emulsi Dingin dan Perbandingan Stabilitas Aspal Emulsi Dingin dengan Laston. Dimensi Pratama Teknik Sipil, 5(2), 1–8. Retrieved from https://publication.petra.ac.id/index.php/teknik-sipil/article/view/4255

Haryati, Y., Norhidayah, A. H., Nordiana, M., Juraidah, A., Hayati, A. H. N., Ramadhansyah, P. J., Azman, M. K., & Haryati, A. (2019). Stability and Rutting Resistance of Porous Asphalt Mixture Incorporating Coconut Shells and Fibres. IOP Conf. Series: Earth and Environmental Science, 1–5. https://doi.org/10.1088/1755-1315/244/1/012043

Hidayatulloh, R., Karyawan, I. D. M. A., & Ahyudanari, E. (2021). Effect of Incorporating Super Bond Additives on Volumetric and Mechanical Characteristics of Cold Mix Asphalt Concrete using Asbuton. Jurnal Teknik, 15(2), 130–136. https://doi.org/10.31849/teknik.v15i2.7616

Hmoud, H. R. (2011). Evaluation of VMA and Film Thickness Requirements in Hot-Mix Asphalt. Modern Applied Science, 5(4), 166–176. https://doi.org/10.5539/mas.v5n4p166

Irianto, I., Tumpu, M., Mabui, D. S., & Mansyur, M. (2021). Influence of Number of Collisions Towards Asphalt Emulsion Mixture Stability Using Marshall Method (SNI 06-2489-1991). IOP Conference Series: Earth and Environmental Science, 921. https://doi.org/10.1088/1755-1315/921/1/012017

Karyawan, I. D. M. A., Hasyim, H., Widianty, D., & Yuniarti, R. (2023). Characteristics of Asbuton Mix Using Geopolymer Fly Ash Coarse Aggregate as a Substitute for Natural Aggregates. Jurnal Penelitian Pendidikan IPA, 9(6), 4156–4163. https://doi.org/10.29303/jppipa.v9i6.3937

Karyawan, I. D. M. A., Yuniarti, R., Widianty, D., Hasyim, H., & Wahyudi, M. (2021). Performance of Asphalt Mixture with Asbuton Based on Marshall Characteristics Compacted at Hot and Cold Temperatures. Jurnal Penelitian Pendidikan IPA, 7(4), 549–555. https://doi.org/10.29303/jppipa.v7i4.884

Kurniawan, W., Lizar, L., & Pribad, J. A. (2021). Karakteristik Campuran Aspal AC-WC Menggunakan Filler Spent Bleaching Earth sebagai Pengganti Abu Batu. Jurnal Teknik Sipil Terapan, 3(2), 80–89. https://doi.org/10.47600/jtst.v3i2.285

Kusharto, H. (2017). Pengaruh Gradasi Agregat Terhadap Perilaku Campuran Beton Aspal. Jurnal Teknik Sipil dan Perencanaan, 9(1), 55–63. https://doi.org/10.15294/jtsp.v9i1.6922

Lawalata, G. M. (2020). Penetapan Indikator Jalan Berkelanjutan. Jurnal HPJI, 5(2), 97–108. https://doi.org/10.26593/jh.v5i2.3370.97-108

Mohi, I., Shafi, M., Adnan, M., Mohi, I., Mir, M. S., & Adnan, M. (2020). Effect of Freeze-Thaw Cycles on the Properties of Asphalt Pavements in Cold Regions : A Review. Transportation Research Procedia, 48, 3634–3641. https://doi.org/10.1016/j.trpro.2020.08.087

Nageim, H. A., Al-Busaltan, S. F., Atherton, W., & Sharples, G. (2012). A Comparative Study for Improving the Mechanical Properties of Cold Bituminous Emulsion Mixtures with Cement and Waste Materials. Construction and Building Materials, 36, 743–748. https://doi.org/10.1016/j.conbuildmat.2012.06.032

One, L., Tjaronge, M. W., Irmawaty, R., & Hustim, M. (2020). Effect of Buton Granular Asphalt Gradation and Cement as Filler on Performance of Cold Mix Asphalt Using Limestone Aggregate. Journal of Engineering Science and Technology, 15(1), 493–507. Retrieved from https://scholar.unhas.ac.id/en/publications/effect-of-buton-granular-asphalt-gradation-and-cement-as-filler-o

Oruc, S., Celik, F., & Akpinar, M. V. (2007). Effect of Cement on Emulsified Asphalt Mixtures. Journal of Materials Engineering and Performance, 16, 578–583. https://doi.org/10.1007/s11665-007-9095-2

Padallingan, O., Kamba, C., & Apriyani, I. (2024). Pemanfaatan Kapur Padam sebagai Substitusi Filler pada Campuran AC-BC Menggunakan Agregat Sungai Salu Kula. PCEJ, 6(3), 519–527. https://doi.org/10.52722/y9886c95

Pangestika, S. H., Saptaji, K., Redi, A. A. N. P., Nandiyanto, A. B. D., Liman, S. D., & Triawan, F. (2023). Utilization of Plastic Waste to Improve Properties of Road Material: A Review. Mechanical Engineering for Society and Industry, 3(3), 120–136. https://doi.org/10.31603/mesi.10133

Purnomo, M. S., Chandra, E., Wulandari, P. S., & Patmadjaja, H. (2010). Pengaruh Variasi Masa Curing pada Karakteristik Campuran Aspal Emulsi Dingin dengan Penambahan Semen. Jurnal Dimensi Pratama Teknik Sipil, 9(2), 138–142. Retrieved from https://publication.petra.ac.id/index.php/teknik-sipil/article/view/10675

Putri, E. E., Idral, M., Makinda, J., & Gungat, L. (2019). Marshall Properties of Porous Asphalt with Gondorukem Rubber Addition. Journal of Engineering Science and Technology, 14(1), 167–180. Retrieved from https://www.researchgate.net/publication/331546234

Ramlan, R. (2016). Variasi Komposisi Gradasi Batuan Terhadap Karakteristik Beton Aspal dengan Uji Marshall. PENA TEKNIK: Jurnal Ilmiah Ilmu-Ilmu Teknik, 1(1), 1–12. https://doi.org/10.51557/pt_jiit.v1i1.59

Sarsam, S. I., & Samor, Z. A. (2020). Evaluation of Cold Mix Asphalt Concrete Properties. Journal of Civil Engineering Inter Disciplinaries, 1(1), 34–40. https://doi.org/10.47890/jceid/2020/sisarsam/12045784

Setiawan, A., Suparma, L. B., & Mulyono, A. T. (2016). The Effect of Aggregate Gradation on Workability of Asphalt Concrete(CFD). International Journal of Engineering and Technology, 8(4), 1750–1757. https://doi.org/10.21817/ijet/2016/v8i4/160804042

Setiawan, A., Suparma, L. B., & Mulyono, A. T. (2017). Modelling Effect of Aggregate Gradation and Bitumen Content on Marshall Modelling Effect of Aggregate Gradation and Bitumen Content on Marshall Properties of Asphalt Concrete. International Journal on Advanced Science Engineering and Information Technology, 7(2), 359–365. https://doi.org/10.18517/ijaseit.7.2.2084

Shah, S. M. R., & Abdullah, M. E. (2010). Effect of Aggregate Shape on Skid Resistance of Compacted Hot Mix Asphalt (HMA). 2nd International Conference on Computer and Network Technology, ICCNT 2010, 421–425. https://doi.org/10.1109/ICCNT.2010.78

Shahnewaz, S. M., Masri, K. A. B., Gani, N. A. A. A., Jaya, R. P., & Choo, C. S. (2024). Mechanical Performance of Two Different Gradations of Porous Mechanical Performance of Two Different Gradations of Porous Asphalt Mixtures Incorporating Bamboo Fiber. Suranaree Journal of Science and Technology, 31(1). https://doi.org/10.55766/sujst-2024-01-e01698

Susanto, I., & Suaryana, N. (2019). Evaluasi Kinerja Campuran Beraspal Lapis Aus (AC-WC) dengan Bahan Tambah Limbah Plastik Kresek. Jurnal Aplikasi Teknik Sipil, 17(2), 27. https://doi.org/10.12962/j2579-891x.v17i2.4980

Syahairony, M., & Naibaho, P. R. T. (2024). Marshall Characteristics, Refusal Density and Abrasion Value on Hot Rolled Asphalt (HRA) Mixtures Using Laterite Stone as Replacement Aggregate. ASTONJADRO, 13(3), 970–1001. https://doi.org/10.32832/astonjadro.v13i3.17555

Thanaya, I. N. A., Ariawan, I. M. A., & Wibawa, I. P. C. (2022). Analisis Karakteristik Campuran Laston Menggunakan Material Perkerasan Jalan Lama dengan Peremaja Limbah Minyak Goreng. Media Komunikasi Teknik Sipil, 28(2), 230-240. https://doi.org/mkts.v28i2.48137

Tumpu, M., & Irianto, I. (2022). Marshall Characteristics of Asphalt Concrete Binder Course (AC-BC) Mixture Containing Modificated Asbuton (Retona Blend 55) Type. AIP Conference Proceedings, 2391, 070012. https://doi.org/10.1063/5.0073735

Wijaksono, P., Abdillah, N., & Halimatusadiyah, H. (2023). Analisis Pengaruh Penambahan Aspal Emulsi Terhadap Nilai Kuat Geser dan CBR Tanah Lempung. SLUMP Tes: Jurnal Teknik Sipil, 1(2), 101–107. https://doi.org/10.52072/slumptes.v1i2.383

Winardi, A., Karyawan, I. D. M. A., & Anshari, B. (2022). Performance of Artificial Compared to Natural Coarse Aggregates as Road Pavement Materials. Jurnal Penelitian Pendidikan IPA, 8(4), 2137–2142. https://doi.org/10.29303/jppipa.v8i4.2129

Winoko, Y. A., & Santoso, S. (2020). Pengaruh Suhu Bahan Bakar Terhadap Emisi Gas Buang pada Mesin Bensin 1800 cc. Jurnal Teknik Ilmu dan Aplikasi, 1(2), 118–122. Retrieved from https://jurnal.polinema.ac.id/index.php/jtia/article/view/1631

Wulandari, P. S., Johnson, J., Santoso, L., Kristianto, Y., & Billyl, M. (2023a). A Laboratory Study on Open and Dense Graded Cold Asphalt Emulsion Mixtures for Surface Courses A Laboratory Study on Open and Dense Graded Cold Asphalt Emulsion Mixtures for Surface Courses. IOP Conference Series: Earth and Environmental Science, 1–6. https://doi.org/10.1088/1755-1315/1134/1/012013

Wulandari, P. S., Lovrecia, K., Santosa, F. M., & Welerubun, G. A. (2023b). The Effect of Asphalt Emulsion Type on the Characteristics of Cold Asphalt Emulsion Mixtures. The 8th International Conference of Euro Asia Civil Engineering Forum 2022. https://doi.org/10.1088/1755-1315/1195/1/012025

Wulandari, P. S., & Tjandra, D. (2023). Properties Evaluation of Cold Mix Asphalt Based on Compaction Energy and Mixture Gradation. IOP Conference Series: Earth and Environmental Science, 1195. https://doi.org/10.1088/1755-1315/1195/1/012024

Yuniarti, R. (2015). Performance of Bio-Flux Oil as Modifier of Buton Granular Asphalt in Asphalt Concrete-Wearing Course. Journal of JSCE, 3(1), 33–44. https://doi.org/10.2208/journalofjsce.3.1_33

Author Biographies

I Dewa Made Alit Karyawan, University of Mataram

Doktor Bidang Teknik Sipil, dosen dengan Jabatan Akademik Lektor Kepala.

 

Ratna Yuniarti, University of Mataram

Desi Widianty, University of Mataram

Fera Fitri Salsabila, University of Mataram

Baiq Sulistia Furwati, University of Mataram

Baiq Anggun Lola Santi, University of Mataram

License

Copyright (c) 2024 I Dewa Made Alit Karyawan, Ratna Yuniarti, Desi Widianty, Fera Fitri Salsabila, Baiq Sulistia Furwati, Baiq Anggun Lola Santi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).