Optimization Design Blade Wind Turbine in Enhancing Power Based on Passive Control System
DOI:
10.29303/jppipa.v9i6.4052Published:
2023-06-25Downloads
Abstract
Control power on rotor wind turbine can be carried out by changing blade angle of attack through via pitch control and stall regulated method to produce much power and control power as well as protect wind turbine from high wind to operate in rated power. By using search-based design method to optimize design blade and Blade Element Momentum Theory (BEMT) to analyze aerodynamic performance for stall and pitch control power. Recent work demonstrates that some very significant effect can be achieved by using constant speed pitch control. Comparing of among ordinary blade and design blade of constant speed stall regulated and optimized show that enhancing power is nearly similar while design blade using pitch control give significant effect in enhancing aerodynamic performance of design blade. For average power, design blade constant speed pitch control has average power about 47970,77 Watt and constant speed stall regulated is 43855,41 Watt
Keywords:
Design Blade Pitch Control Power Coefficient Stall Regulated Rotor PowerReferences
Anggereini, E., Nainggolan, R. A., & Aina, M. (2023). The Influence Public Knowledge and Perception Regarding Use Alternative Energy Sources Based Biofuels. Jurnal Penelitian Pendidikan IPA, 9(2), 690–697. https://doi.org/10.29303/jppipa.v9i2.2578
Chen, H., & Qin, N. (2017). Trailing-edge Flow Control for Wind Turbine Performance and Load Control. Journal Renewable Energy, 105, 419-435. https://doi.org/10.1016/j.renene.2016.12.073
Cheney, M.C., & Speirings, P.S.M. (1978). Self-Regulating Composite Bearing Less Wind Turbine. Journal Solar Energy, 20, 233-240. https://doi.org/10.1016/0038-092X(78)90102-0
Dao, C., Kazemtabrizi, B., & Crabtree, C. (2019). Wind Turbine Reliability Data Review and Impacts on Levelised Cost of Energy. Journal Wind Energy, 22, 1848–1871. https://doi.org/10.1002/we.2404
Ebrahimi, A. & Movahhedi, M. (2018). Wind Turbine Power Improvement Utilizing Passive Flow Control with Microtab, Journal Energy, 150, 575-582. https://doi.org/10.1016/j.energy.2018.02.144
Habib, H., Rahimi, H.N., & Howard, I. (2017). Power Maximization of Variable-Speed Variable-Pitch Wind Turbines Using Passive Adaptive Neural Fault Tolerant Control. Journal Frontiers of Mechanical Engineering, 12(3), 377-388. http://doi.org/10.1007/s11465-017-0431-4
Li, S., Zhang, L., Yang, K., Xu, J., & Li, X. (2018). Aerodynamic Performance of Wind Turbine Airfoil DU 91-W2-250 under Dynamic Stall. Journal Applied Sciences, 8(7), 1111. https://doi.org/10.3390/app8071111
Maheri, A., (2020). Multiobjective Optimisation and Integrated Design of Wind Turbine Blades Using WTBM-ANSYS for High Fidelity Structural Analysis. Journal Renewable Energy, 145,814-834. https://doi.org/10.1016/j.renene.2019.06.013
Maheri, A., Wiratama, I.K., & Macquart, T. (2022). Performance of Microtabs and Trailing Edge Flaps in Wind Turbine Power Regulation: A Numerical Analysis Using WTSim. Journal of Renewable Energy and Environment (JREE), 9(2), 18-26. https://doi.org/10.30501/jree.2021.291397.1220
Macquart, T. & Maheri, A. (2015). Integrated Aeroelastic and Control Analysis of Wind Turbine Blades Equipped with Microtabs, Journal Renewable Energy, 75, 102-114. https://doi.org/10.1016/j.renene.2014.09.032
Macquart, T., Maheri, A. & Busawon, K. (2017) A Decoupling Control Strategy for Wind Turbine Blades Equipped with Active Flow Controllers, Journal Wind Energy, 20, 569-584. https://doi.org/10.1002/we.2024
Maslikhah, M., Jannah, R., & Erawati, M. (2022). Green Behaviour for Energy Efficiency as a Sustainable Campus Support. Jurnal Penelitian Pendidikan IPA, 8(4), 1677–1685. https://doi.org/10.29303/jppipa.v8i4.1501
Menezes, E.J.N., Araújo, A.M., & da Silva, N.S.B. (2018). A Review on Wind Turbine Control and Its Associated Methods. Journal of Cleaner Production, 174, 945-953. https://doi.org/10.1016/j.jclepro.2017.10.297
Muslimah, S., Putut, M., & Sigit, P. (2022). Characterization of Spent Coffee Grounds in the Community as Supporting Materials for Renewable Energy. Jurnal Penelitian Pendidikan IPA, 8(2), 918–924. https://doi.org/10.29303/jppipa.v8i2.1227
Samani, A.E., Jeroen, D. M., Kayedpour, N., Singh, N., & Vandevelde, L. (2020). The Impact of Pitch-To-Stall and Pitch-To-Feather Control on the Structural Loads and the Pitch Mechanism of a Wind Turbine. Journal Energies, 13(17), 4503. https://doi.org/10.3390/en13174503
Ward, D., Collu, M., & Sumner, J. (2019). Reducing Tower Fatigue through Blade Back Twist and Active Pitch-to-Stall Control Strategy for a Semi-Submersible Floating Offshore Wind Turbine. Journal Energies, 12, 1897. https://doi.org/10.3390/en12101897
Wiratama, I. K. (2014) Validation of AWTSim as Aerodynamic Analysis for Design Wind Turbine Blade. Journal Applied Mechanics and Materials, 493, 105-110. https://doi.org/10.4028/www.scientific.net/AMM.493.105
Wiratama, I. K., & Maheri, A. (2014). Optimal Design of Wind Turbine Blades Equipped with Flaps. Journal of Engineering and Applied Science, 9, 1511-1515. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84907258786&partnerID=MN8TOARS
Wiratama, I. K., Mara, I. M., & Nuarsa, I. M. (2016). Investigation of Factors Affecting Power Curve Wind Turbine Blade. Journal of Engineering and Applied Science, 11, 1819-6608. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84960432952&partnerID=MN8TOARS
Wiratama, I.K., Yudhyadi, G., Sayoga, M., & Ramdani, M. (2021). Computational Investigation of Deploying Microtabs on Airfoil Wortmann FX63-137. Journal of Physics: Conference Series, 1816, 012108. https://doi.org/10.1088/1742-6596/1816/1/012108
Wiratama, I., Suartika, I., Joniarta, Mara, I., Nuarsa, I., & Ansori, M. (2023). Analysis Aerodynamic Performance Airfoil WORTMANN FX63-137 in Different Reynolds Number. Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical), 125. https://doi.org/10.2991/978-94-6463-078-7_14
Yuan, Y., & Tang, J. (2017) On Advanced Control Methods toward Power Capture and Load Mitigation in Wind Turbines, Journal Engineering, 3(4), 494-503. https://doi.org/10.1016/J.ENG.2017.04.023
License
Copyright (c) 2023 I Kade Wiratama
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
