The Validity of Video Tutorials CNC/CAM for Learning in the Machining Engineering Department of Vocational High Schools

Authors

Rofi Chandra , Syahril , Ambiyar , Refdinal

DOI:

10.29303/jppipa.v9iSpecialIssue.6109

Published:

2023-12-25

Issue:

Vol. 9 No. SpecialIssue (2023): UNRAM journals and research based on science education, science applications towards a golden Indonesia 2045

Keywords:

CNC/CAM, Expert validation, Video Tutorial Development

Research Articles

Downloads

How to Cite

Chandra, R., Syahril, S., Ambiyar, A., & Refdinal, R. (2023). The Validity of Video Tutorials CNC/CAM for Learning in the Machining Engineering Department of Vocational High Schools . Jurnal Penelitian Pendidikan IPA, 9(SpecialIssue), 836–842. https://doi.org/10.29303/jppipa.v9iSpecialIssue.6109

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

The development video tutorials was carried out to address the challenges in learning CNC/CAM at Vocational High Schools (SMK), especially in the CNC/CAM subject. In this research, the 4D model (Define, Design, Develop, and Disseminate) stages of development were employed, which include needs analysis, design, development, and dissemination. The validation results by media experts and subject matter experts indicate that these video tutorials are highly suitable, with a validity percentage of 89.24% by media experts and 85% by subject matter experts. These results demonstrate that the CAM learning videos developed through the 4D model are suitable for use in the learning process. The development of video tutorials for CNC/CAM learning in vocational high schools can be an effective solution to overcome challenges in students' understanding and skills in this subject. By using the 4D model for development, the high validation results from media and subject matter experts indicate that these video tutorials have excellent quality. The use of these video tutorials is expected to enhance students' understanding and skills in the field of CNC/CAM, which are crucial for their preparation in the industrial world. Furthermore, this research also provides recommendations for utilizing these video tutorials in broader learning contexts, teacher training, and the development of other materials.

References

Afrina, A., Aminah, S., & Hadi, S. (2023). Pengaruh Pendidikan Aqidah Akhlak Terhadap Kepribadian Siswa Kelas V Di MIS Mathlail Khoir, Kecamatan Bojong Gede, Kabupaten Bogor. At-Tadris: Journal of Islamic Education, 2(1), 108-116. http://dx.doi.org/10.56672/attadris.v2i2.73

Ambiyar, A. (2012). Profesional Development Education Vocational High School Teacher Knowledge Century. http://repository.unp.ac.id/id/eprint/16108

Arif, C., Muskir, M., & Refdinal, R. (2022). Pengembangan E-Modul Pembelajaran Berbasis Web pada Mata Pelajaran Gambar Teknik Listrik di Sekolah Menengah Kejuruan. Scaffolding: Jurnal Pendidikan Islam dan Multikulturalisme, 4(2), 170-196. https://doi.org/10.37680/scaffolding.v4i2.1409

Budiastuti, D. (2022). Validitas dan reliabilitas penelitian.

Darmanto, Joko. (2007). Modul CNC Milling. Bogor: Yudistira, 20017.

De Leng, B. et al. (2007). How video cases should be used as authentic stimuli in problem-based medical education. Medical Education, 41(2), 181–188. https://doi.org/10.1111/j.1365-2929.2006.02671.x

Fransisca, M. (2017). Pengujian validitas, praktikalitas, dan efektivitas media e-learning di sekolah menengah kejuruan. VOLT: Jurnal Ilmiah Pendidikan Teknik Elektro, 2(1), 17-22. DOI: http://dx.doi.org/10.30870/volt.v2i1.1091

Hairuni. (2022). Media Online Di Era Revolusi Industry 4.0 Dan Society 5.0 Serta Peran Humas Dalam Menyajikan Informasi. diakses pada tanggal 11 Desember 2022 pukul 15:58 dari https://humas.paserkab.go.id/

Lesmana, Hendra Jaya (2019) Analisis Optimasi Parameter Permesinan Terhadap Waktu Proses Pada Pemrograman CNC Milling Dengan Menggunakan Mastercam X5 di PT. Servitama Teknindo. http://repository.uki.ac.id/id/eprint/4096

Lin, Q. (2008). Student Views of Hybrid Learning: A One-Year Exploratory Study. Journal of Computing in Teacher Education, 25(2), 57–66. Macmillan Publishing Company. https://doi.org/10.1080/10402454.2008.10784610

Maydiantoro, A. (2021). Model-Model Penelitian Pengembangan (Research and Development). Jurnal Pengembangan Profesi Pendidik Indonesia (JPPPI).

Mulyatiningsih, Endang. (2013). Metode Penelitian Terapan Bidang Pendidikan. Yogyakarta: Alfabeta.

Muthiah. 2018. Pengembangan Media Pembelajaran Video Tutorial Pembuatan Rok Suai Kelas XI Tata Busana Di SMK Negeri 1 Ngawen. Jurnal Pendidikan Teknik Busana UNY.

Mohamad, M. M., Masek, A., Yunos, J. M., Alias, M., Hamdan, N. H., & Rahma Putra, A. B. N. (2020). Assessing heutagogical elements in learning of engineering education: Instrument validation. Advances in Science, Technology and Engineering Systems, 5(5), 245–252. https://doi.org/10.25046/AJ050530.

Niswa, Auliyah. (2012). Pengembangan bahan ajar mendengarkan berbasis video interaktif bermedia flash kelas VIID SMP Negeri 1 Kedamean. Fakultas Bahasa dan Seni, Universitas Negeri Surabaya.

Pramudito, A. (2013). Pengembangan Media Pembelajaran Video Tutorial Pada Mata Pelajaran Kompetensi Kejuruan Standar Kompetensi Melakukan Pekerjaan Dengan Mesin Bubut di SMK Muhammadiyah 1 Playen. Jurnal Pendidikan Teknik Mesin, 1–12.

Purnomo, D. (2018). Uji Validitas dan Realibilitas Step Test Sebagai Alat Ukur Keseimbangan Pada Lansia. Jurnal Fisioterapi Dan Rehabilitasi, 2(2), 53-70. https://doi.org/10.33660/jfrwhs.v2i2.23

Putra, Ino Angga. (2014). Pengembangan Model Hybrid Learning Untuk Meningkatkan Penguasaan Konsep Siswa Selas X SMA Pada Materi Kinematika Gerak [Universitas Negeri Malang. http://repository.um.ac.id/id/eprint/59742

Putra, R. F., Syahril, S., Yufrizal, A., & Arafat, A. (2020). Pengembangan Panduan Pengunaan Mastercam Pada Mata Pelajaran NC-CNC dan. Jurnal Vokasi Mekanika, 2(1), 46-52. https://doi.org/10.24036/vomek.v2i1.86

Puyada, D., Ganefri, G., Ambiyar, A., Wulansari, R. E., & Herawan Hayadi, B. (2018). Effectiveness of interactive instructional media on Electrical Circuits. International Journal of Engineering and Technology(UAE), 7(2.14 Special Issue 14), 220–223. http://repository.unp.ac.id/id/eprint/21390

Rahayu, C., & Festiyed, F. (2019). Validitas perangkat pembelajaran fisika SMA berbasis model pembelajaran generatif dengan pendekatan open-ended problem untuk menstimulus keterampilan berpikir kritis peserta didik. JPF (Jurnal Pendidikan Fisika) Universitas Islam Negeri Alauddin Makassar, 7(1), 1-6. https://doi.org/10.24252/jpf.v7i1.5363

Rahdiyanta, Dwi. (2020). Tantangan Pembelajaran Pemesinan di Era Revolusi Industri 4.0. diakses pada desember 2022 dari https://www.uny.ac.id/id/fokus-kita/prof-dr-ir-dwi-rahdiyanta-mpd_tantangan-pembelajaran-pemesinan-di-era-revolusi-industri.

Revi, dkk. (2018). Pengembangan Media Video Tutorial dalam Pembelajaran Komputer untuk Keterampilan Membuat Server di SMK. S2 TEP, Universitas Tanjungpura Pontianak.

Sari, Purnama. (2018). Pengembangan Model Pembelajaran Berbasis IDI (Intructional Development Institute). STMIK Royal-AMIK Royal, hlm. 573–576. https://jurnal.stmikroyal.ac.id/index.php/senar/article/view/244

Subroto, Anthony Seno. (2010). Analisis Kelayakan Perpanjangan Lisensi Software CAD/CAM/CAE (Studi Kasus di Dieshop Dmd, PT. AHM)

Sugiyono. (2011). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta.

Sugiyono. (2014). Metode Penelitian Kuantitatif, Kualitatif dan R &. D. Alfabeta.

Syahril, dan Mandalika. (2020). Pengembangan Media Pembelajaran Berbasis Video Tutorial untuk Meningkatkan Efektifitas Pembelajaran Pada Mata Kuliah Tata Rias. Jurnal Inovasi Vokasional Dan Teknologi, 20(1), 85–92. http://repository.unp.ac.id/id/eprint/26595

Watrianthos, R., Ambiyar, A., Rizal, F., Jalinus, N., & Waskito, W. (2022). Research on vocational education in indonesia: a bibliometric analysis. JTEV (Jurnal Teknik Elektro dan Vokasional), 8(2), 187-192. https://doi.org/10.24036/jtev.v8i2.117045

Zeda, F. R., & Muliati, I. (2022). Praktikalitas Media Pembelajaran Berbasis Wordwall pada Mata Pelajaran Pendidikan Agama Islam Kelas V di SDN 19 Kampung Jawa Kota Solok. AS-SABIQUN, 4(4), 859-873. 10.36088/assabiqun.v4i4.2085

Author Biographies

Rofi Chandra, Universitas Negeri Padang

Syahril, Universitas Negeri Padang

Ambiyar, Universitas Negeri Padang

Refdinal, Universitas Negeri Padang

License

Copyright (c) 2023 Rofi Chandra, Syahril, Ambiyar, Refdinal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Penelitian Pendidikan IPA, agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Penelitian Pendidikan IPA.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).